Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation since 03/05/2018 in all areas

  1. Looking back I owe everyone a big thank-you for using the forum and taking an interest in the blog, it is amazing what it has turned into with so little effort on my part I think this place must be the only website on the entire internet without adverts. Long may it continue like that. Got a GX9 arriving tomorrow... about time I did a review of something cheap with the big shift to high-end stuff. Let me know what you'd like to see in the review of it.
    50 points
  2. As someone less than politely pointed out on the other thread, I appear to have been a bit of a lazy arse in the almost 12 months since I tripped over and found the Cinelike d thing. You may recall it happened because I was researching making a hardware controller and after several iterations, here it finally is. And yes, it does look rather like a calculator doesn't it? The different iterations (including an Android app at one point!) have been in pursuit of making something small, standalone, self powered, fast connecting, push buttons and with an integrated screen at a lowish cost and, well, here we are. Here is the finished spec and features : Compatible with all Panasonic Lumix cameras that can be controlled by wifi Integrated USB rechargeable battery Full colour screen 20 keys with 3 bank switch keys giving 60 direct switch operations of functions Control of Aperture, ISO, Shutter Speed, White Balance, Colour Profile, Contrast, Saturation, Sharpness and Noise Reduction. Automatic unlocking of Cinelike D and Cinelike V on GX80/85, LX10/15 and TZ10 Control of manual focus in fine and coarse steps Control of One Shot AF Control of Record Stop/Start Store and Recall 8 focus points 4 selectable transition speeds between focus points Store and Recall 8 setup presets (each consisting of Aperture, ISO, Shutter Speed, White Balance, Colour Profile, Contrast, Saturation, Sharpness and Noise Reduction) Presets are stored in non-volatile memory so are available in any session. Boot time to camera connection and control under 2 seconds. Wifi control range tested to 20m. Optional accessories : Interface module to support Nintendo Nunchuck controller for manual focus control (native lenses and adapted lenses with smart adapters) and zoom (integrated lens cameras and power zoom lenses only) Wireless interface module to sync remote record and stop on supported Tascam, Zoom and SoundDevices audio recorders. The controller fits a regular cheap cellphone to threaded adapter holder so as well as being used handheld it can be mounted to anything you have a need for with the right attachment so could be on a cage or a gimbal or whatever. I'm going to be doing some more testing of it in anger in the next couple of weeks and I'll put up a video of it in action then. So, I have been a bit less lazy than first imagined By the by, the controller has both wifi and bluetooth so it begs the question would anyone be interested in a version of it for the Pocket 4K ??
    31 points
  3. The video was shot with a single GH5 (with a little A6500 in there) in 10 hours, edited, graded and effects done in 4 days (by me). The new album (last I heard) was at No.7 in the official UK chart. I'm a big fan of what Panasonic has done with this camera. That said, the shining star of this video is the band.
    31 points
  4. My dear erstwhile member can you please stop attacking John Brawley now. I have long since given up on camera forum arguments so might not be completely up on who is right and who is wrong-evil / killed-a-kitten, but can we tone it down a bit. It's JB! We could be learning so much and having such interesting cameras talks with a film industry guy and I am sure one of the only people with a Blackmagic Pocket 2 prototype yet instead a handful of you are just bitching. It's pointless. Even if you disagree with him on certain matters, hold your tongue a bit for the benefit of the rest of us who are interested in what he has to tell.
    30 points
  5. Hey Everyone, Here’s a bunch of stuff I’ve shot, graded and edited for music videos between 2012-2018. The shots in the reel not done by me are the drone shots. For you camera nerds, I used...... Sony FS700, FS5, FS7, F55, A7SII, A6500. Panasonic GH3, GH5. DJI X3, X5R.
    29 points
  6. kaylee

    my first short

    ok so in the spirit of eoshd togetherness I have decided to share this video to see what u guys think. maybe it will inspire zach ☺️ let me explain: i made this short at the end of last year, but I never completed the edit/fx/etc 100%. Got busy with other stuff, and I was working up my gumption to come back to it with a fresh eye. then my iMac broke, and I have a new ‘puter on the way, but I’m anticipating the nightmare of opening resolve and Siri saying ERROR: NO MEDIA FOUND, because my files, ALTHOUGH BACKED UP, are super disorganized, there might be a few things missing, but at the very least it’ll be a big pain in the ass to relink everything to get going on this again aannnyyyway I always feel bad for posting literally zero videos but numerous dog pics and I was like Screw it, its not perfect, but here ya go. this is not the best file, its the one I had in icloud, there could be a better render, etc etc, and its getting murdered by youtube compression, but my first reaction watching it after not messing with it for a few months was…. …Hey~! Its not too bad! ☺️ not bad for a first film i made all by myself! imagine if I had a crew, a budget… ? so, if youd like to see, pls check it out, and if you have any helpful feedback that involves changing/adding things, that’s great, but I do NOT have access to the actors/locations any more and there is almost no chance of me shooting additional footage, so as long as suggestions don’t involve me spending any more money on this project, I’m all in ? at best, I think this is a cool example of what one person can do with a 5d3 in 2019 with no budget, crew, or resources whatsoever... as indie as it gets lolol
    27 points
  7. I like the pictures. A lot. This camera will probably replace the micro cinema camera for me as it’s not much bigger and is much easier to work with. I didn’t feel as strongly about the 4K production camera / Ursa because they were limited, principally by dynamic range. I have a deep affection for the 4.6K sensor and have shot nearly daily withnit since before it was launched. I know it very well. This pocket camera will integrate and sit very nicely alongside the 4.6K. It’s already a closer match than the micro for me without having really tested it in an A/B scenario. I was a little worried about it having less DR Than the 4.6K but I think the other clips show some great examples of what this sensor can do. “Nature” was incredibly tricky material to shoot as anyone who’s been in that situation before would know and it was unfair to see it being derided. Those that did so only reveal their own inadequate understanding of what those shots reveal. I can think of a million other scenarios I would have rather done but these sequences were specifically produced to illuminate what the camera can do in specific situations. What im almost more excited about is the unification that Gen 4 brings. As I mentioned earlier, it’s pretty much the same people at BMD that brought you the first camera working on this camera. They’ve learned a lot (and so have I) and I think Gen 4 is really strong. I wish this and extended video would get rolled out wide already as I think half the issue I see with users of BMD products is a lack of knowledge in grading. Now BMD do have perhaps the greatest colour correction tool on the market BUT they don’t make it easy to get to a great result without a little arcane knowledge. Even I often run into issues when working by myself and I see extended video being a great step in addressing that shortcoming. There’s no point in talking about how great you can make images shot RAW if you don’t know how to do it and can’t easily or intuitively find a way to do so. With regards to the 4k Pocket. Its a genuine low light contender. I was really impressed at what a useable picture it produces with little lighting. I’m laughing at those that said it’s overlit. I mean a 500w chimera dimmed to almost nothing so the background lighting would still show though the tinted hotel windows is very very low light, much lower levels than the idiots demanding I walk out on the street and light by sodium were demanding. Again, I laugh when I see comments about how noisy ISO3200 is but I’m guessing those users aren’t aware how much image processing their cameras are doing at high ISOs. BMD allow you as the user to choose your poison. A very very underrated feature. And like colour correction it’s almost too powerful because users haven’t been instructed to change their expectations, nor how to add noise reduction or sharpening so they can season to taste. The best testbfootage will be friends users so the sooner they ship the cameras the better. Hopefully Gen 4 means there will be less hysteria about its performance and a few will realise there’s no point comparing it to a GHx or a Sony and learn to get the most from what it is good at. JB
    27 points
  8. Pleased to announce that my Pocket4K app for Android is now complete and is with beta testers so barring any calamties will be available from the Play store on the 21st of December. Here is a screen shot with a quick run through of the features from top to bottom : Across the top we have the controls for Aperture, ISO and shutter angle. Next up we have the colour temperature and tint controls, the preset white balance selectors, the Auto White Balance button and, of course, the Record button. Beneath that we have the 8 snapshot memories which you can use to store and instantly recall 8 different custom settings of ISO, Aperture, Shutter Angle and White Balance. To store the preset you long press on the memory slot that you want to use and to recall it just short press. Haptic feedback is given to indicate that the preset has been written and the currently loaded preset is denoted in orange (M1 in the shot above). Presets are stored in non volatile memory so are always available in any session. Next is the focus controller, which is operated using the slider and/or the fine tune buttons. A long press of the button moves instantly to closest focus and infinity respectively. The AF button in ths row activates the single shot auto focus. To accompany the focus controls, you then have 6 memory slots (A to F) to store focus points and you can switch instantly between them by simply pressing the required one. In addition, next to these are the controls for A-B-A focus transition and the speed control. Again, all focus points are stored in non volatile memory for use in any session. Finally we have the controls for applicable MFT power zoom lenses with the same interface as the focus controls (including long press for instant minimum/maximum zoom) and 4 non volatile memory positions for later recall. There is another function that it can do that I'll let you know about closer to release date and I will put up a little demo video of it in action late next week.
    25 points
  9. What a shame. Who are these "deep state" BMD insiders that are here pushing an agenda ? Myself and Hook. Who else ? What do you guys think, there's a plot and conspiracy ? You guys don't wat these contributions I guess ? I'm here because I've been a member here for years and I'm on many camera forums and this is just another one I like to read and contribute to where I can. I want to know where all the clowns that were saying on this thread that the world was going to end because BMD didn't have any footage out yet and that definitely meant something was very wrong and the shipping date would be missed. All I've seen so far is that a planned marketing campaign by BMD that has gone off the way they intended. They commissioned some actual filmmakers (not bloggers or camera reviewers) that make certain types of film (natural history, action sports, nature) to make some films and then they released them and the camera originals. Then they gave some cameras, complete with some boxes as if they were new to some secondary users, and whilst having them also under NDA, got them to shoot some test footage and allowed some of them to release that footage. Again. Not reviewers. Not bloggers. About a thousand reviewers and camera jockeys have done a bunch of made up comparisons and VLOGS based on existing footage. (hey I love seeing my footage being butchered by grading nerds) Think about it. No blogger or reviewer ANYWHERE has gotten a functioning camera to shoot with as far as I can tell. Because that's not what BMD want to do with their marketing of this camera. This isjust marketing 101. They need people using the cameras in the many difference specific sectors of the market will use the camera. Camera reviews aren't part of that plan. (though it hasn't stopped people doing it based on existing footage) Until it's shipping, it's their choice to give it to whomever they want. I'm tired of this entitled bullshit. I recently left a few facebook groups I was on for this camera, and I'm doing the same here. Frankly it's juvenile and I don't need the agro I sure hate explaining what should be obvious. There's no slight. BMD have a marketing department and they have a plan and it doesn't involve forums, bloggers or camera reviewers. That's not a snub, that's just them marketing the product in the way that they see fit. JB
    24 points
  10. Neumann Films

    CaMeRa ShOoToUt

    I feel like there is a crowd for these videos here. Apologies for the shameless self promotion though.
    23 points
  11. EOSHD testing finds Canon EOS R5 overheating to be fake, with artificial timers deployed to lock out video mode. In this test, we will probe my Canon EOS R5’s actual internal temperature in Celsius, as reported by the firmware. This week CDA-TEK and I are developing an Android app for the Canon EOS R5, which connects to the camera via the Canon API... Please read the rest of the article on the blog carefully before commenting below
    23 points
  12. I'm here if you need to talk.
    22 points
  13. Seems people like pairing their S1H with Leica-R lenses... and I'm one of them! I'm shooting a short doc on my brother about his comic book, "I Am Not Okay With This", as it's currently being adapted into a series for Netflix. This will be the second time he's had a comic book adapted into a series. The first was "The End of the F*cking World" which did well, however, he told me that people would see him signing copies of the original comic at cons, and accuse him of "ripping off the show". So this time, i wanted to help raise his profile a bit when "I Am Not Okay With This" is released, and it gives me something to flex my creative muscles on. Anyway, some sample stills... Panasonic S1H, Leica Summicron-R 35mm, 50mm, & 90mm. Not a final grade -- just wanted to get some images out.
    22 points
  14. Hey, finally done with the trailer to our debut feature film at 55Media shot almost entirely on the Panasonic GH5 (some shots on the GoPro6 and P4P) in just 12 days. Our best work yet. Movie is still going through post-production. Production company: 55Media Director/Writer: Uche Aguh Director of Photography: Dennis Schmitz (me) Assistant Director: Ukairo U. Ukairo. Starring: Jarius Drew Sowells, Kayode Akinyemi, Vincent Ramirez, Thiree Pinnock, Julian Horton, Obum Nwankwo and J Shawn Durham as 'Daddy G' Editing done in Premiere. Colorgrading done in Davinci Resolve. Dealing with the usual quirks of this camera, but results are still great. More information: www.imdb.com/title/tt7928156 www.55media.net
    22 points
  15. Hello to everyone on the forum! A Merry Christmas from me! I hope you're looking forward to having a good break over the holidays and are ready to welcome in 2022. Talking of holidays - I have been having a break from EOSHD for a few months. I went and sat on a hill and finally had time to reflect on my work which is this blog and the community around it. The last video had a lot of support, it's made me really appreciate what I have in a more positive light. I'm mega appreciative of the people who took the time to say how EOSHD has helped them over the years and that they want it to continue. So that's what we'll do! EOSHD is back. Read the full blog post here
    21 points
  16. Time of Flight / LiDAR continuous autofocus is really quite remarkable technology. There are rumours Panasonic will implement it on future cameras like the GH6. Don’t you wish the current autofocus-challenged cameras like the Blackmagic Pocket Cinema Camera 4K or GH5 could have amazingly smooth Dual Pixel AF-like performance? Well, you could soon be in luck. Time of Flight Autofocus is a reality and I’ve seen it working. With this prototype add-on, a Time of Flight sensor sits in the hotshoe and talks wirelessly to the Pocket 4K. The autofocus motors in the Micro Four Thirds lens are commandeered based on real-time depth sensing information from the LiDAR beam. I met up with CDA-TEK’s Ian (BTM_Pix on the forum) this week in Manchester to take a look at what he’s been working on. Read the full article
    21 points
  17. Andrew, the comments about grading weren’t intended for you specifically. Read the post. I was talking in generalities about recent facebook groups I’d left and a similar entitled tone here. It was not a personal attack but you chose to take it that way. Cmon, I shoot these shots for BMD for exactly this purpose. To be downloaded and graded. If I was truly precious about it I wouldn’t do it again and again would I ? You’re throwing a tantrum, publicly, because you dind’t get an invite to a BMD event that is seems like few even knew about. Somehow you think that’s got something to do with me so you went and wrote a post about me. A really lovely piece too. I’ve said it already a thousand times. I don’t work for them. I don’t have that much to do with them day to day. Last contact I had with anyone at BMD was weeks ago. It’s not my job to make sure YOU get some attention from them. That’s on you to make that case. And by the way, this kind of childish unprofessional behaviour is exactly the kind of reason any company would think twice about working with you. Instead, you launch a highly personal assasination blog post as well as numerous personal attacks because I dared to try and explain that to you in a way that you thought wasn’t deferential enough ? You don’t do this for free. You sell something. I don’t but you actually do. Having traffic come to this site means you have a greater chance of selling something. You sell LUT’s and you sell guides and you use the traffic here to do so. So don’t pretend all this free traffic is somehow a favour to BMD and free publicity. I didn’t even see the post you made about the BMD footage till your personal attack on me, but I noticed when I read your BMD post you’re mixing in a bunch of references to LUT’s you’re trying to flog. How about this... Delete every single post of mine. All the IP that I’ve posted and shared on this forum? All those posts where I’ve shared my knowledge and experience. Go ahead and put your money where your mouth is. JB
    21 points
  18. Make it 40... to me this camera doesn’t even exist. Eventually we’ll have footage from John Brawley or Frank Glencairn or Noam Kroll and the footage will look amazing. More people will love it but a few will find something wrong with it... Eventually card info will be released, and more people will complain. Eventually AF tests will show up comparing this camera to the PDAF of the a6500 and more people will complain. Eventually low light tests will show up comparing this camera with the GH5s or the a7sii and more people will complain. At the end, when it’s released, a bunch of people will complain because they hate that they have to use an IR Cut filter and they will complain that they only get 45-60 minutes of battery life and that they wish it had IBIS... And eventually the usual suspects will be the only people that have the camera and the footage will be absolutely gorgeous. The End.
    21 points
  19. Hey guys, late last year I bought a P6K to work alongside the Alexa I normally shoot with. The goal was to have smaller, lighter camera that would live on a gimbal or could be used in situations where a full size Alexa wouldn't work. Knowing that both cameras would need to intercut seamlessly, I set about profiling the P6K using the same process I had previously used to profile the Alexa sensor and various negative film stocks. This process generates approximately 14,000 data points per camera. I then took the visual form of this data into Resolve and created a PowerGrade that accurately matches the P6K to the Alexa. After several requests, I've now packaged up the PowerGrade and added it to my store. You can check it out here: https://juanmelara.com.au/products/bmpcc-6k-to-alexa-powergrade-and-luts The PowerGrade At the heart of a PowerGrade is a custom 3x3 matrix that aligns the P6K's colours with the Alexa's. Because this is done through a matrix in linear space, the result is actually closer to a technical transform. The benefits this brings over a LUT is that it's non destructive, there's no danger of clipping or clamping data. And if you really wanted to, you could fully reverse the transform with zero loss in quality. This is because it doesn't break Resolve's 32bit float space like LUTs do. Probably one of the best features of a PowerGrade is that is fully editable and customisable. But since editing a 3x3 matrix isn't the easiest thing in the world, I've also included a Hue vs Hue/Hue vs Sat curve approximation of the matrix which is far easier to customise. And because it's a PowerGrade you can see exactly what is being done by each node, which means that I'm not able to hide snake oil like you can with a LUT. The LUTs Speaking of LUTs, knowing that a lot of people actually prefer to work with LUTs, I also created a LUT version. It's the exact same transform but in LUT form. One of the biggest limitations with most LUTs is that they clip any information that exceeds the top of the waveform, so basically any value above 1.0. This is a big issue with BMPCC footage as enabling Highlight Recovery or working with any ISO above 400 pushes valuable information above 1.0, where it is permanently clipped. With this BMPCC specific requirement in mind, I developed the LUTs to accept and work with values exceeding 1.0. So no matter if you enable Highlight Recovery or push the ISO to 6400, the LUT is able access and process all the information extending above 1.0. Anyway, check it out and let me know if you have any questions or comments. I'm keen to get feedback from any users to see what can be improved or expanded on. Comparisons Here are a few comparison images shot with the P6K mounted on the Alexa's top handle. The Alexa was using a Zeiss Milvus 35mm, the P6K was using a Zeiss Milvus 25mm, then cropped in post to match the FOV. The Alexa images are untouched, the P6K images feature minor exposure adjustments only. Check the store link for more images.
    20 points
  20. Well, here we are then. The 3C app is now officially available from the Play store for Android devices. 3C enables you to remotely control and monitor the primary functions of your Blackmagic Design Pocket Cinema Camera 4K from an Android device using Bluetooth LE. Using 3C, you have access to the following camera functionality. Aperture ISO Shutter Angle White Balance Record Focus & Zoom (with compatible lenses) With 3C you can also store your own custom setting sets for exposure, focus and zoom parameters for later recall as well as automate transitions between stored focus points*. For ease of use, 3C uses a single screen touch interface to control all of this functionality and avoid the need for you to have to activate any sub-menus to change settings. 3C has a scalable user interface to enable you to remove focus and zoom controls from the screen should you not require them and wish to run the app on a small screen Android device. In addition, 3C can also be used as an interface hub to enable control of the camera from compatible Bluetooth gamepads. You can purchase 3C from the Play store here http://tinyurl.com/y5eyujeu You can read the PDF user guide here User Guide For 3C v1.1 by CDA-TEK Ltd .pdf You can use gamepads from iPega and 8Bitdo that support keyboard mode and examples of these are https://www.amazon.co.uk/dp/B00KA6OR7Q (iPega) and https://www.amazon.co.uk/dp/B017PAX036 (8Bitdo). 3C will also support wireless live viewing from the camera in a future update with additional hardware.
    20 points
  21. Looking at recent posts objectively, it is always the same users who end a perfectly good discussion on this forum with toxic bullshit. I am coming after you. It is a cull. It isn't about politics. It's about values! To protect a community I love... I have no choice. To be clear, it is none of my business which way you vote. What matters is behaviour, character, values. If you've been a good contributor here and kind to people you get to stay. If not, then you are going to be asked to leave and I will pursue people who return under a different name. This is purely because there are now far too many posts being trashed and too much arguing driven by people with the wrong values which I despise. I am going to use this week to draw up a list of people who strongly align themselves with Trump's politics of America First. And I will be getting rid of the lot of you. Yes you can say it's a political purge but I prefer to think of it as purely about values and about protecting users who DO contribute positively to the forum. If these idiots are allowed to get away with bringing Trump idolising bullshit into this community then all our work will be for nothing and Russia with their fake-user farms will have won too, because I am 99% sure at least a few of the idiots are completely made-up shill users whose role is to divide us politically and weaken our online communities. At a time when we must pull together as a camera-community, as filmmaking industry, even as a country, indeed as a world - to get through tough economic times ahead - dumb arguments which ignore factual data are a waste of time. What has happened to the world in recent weeks is stressful enough and I personally do not need to hear from certain people in every thread. I will not be providing a platform for Red cap wearing idiots who haven't contributed a single shot or image to this forum. I get that EOSHD has a big US readership, in fact the US contribution to my site is the largest in the world and I want to keep as many of you as possible and not lose any friends who just happen to disagree with me on politics. But if you are going to be a shill for Trump's politics or somebody who is a complete shit-stirrer and troll, then I will no longer be turning a blind eye to it and the cull starts now... Have fun on your way out.
    18 points
  22. We shot this as a two man crew over two weeks in Georgia. Was a whirlwind shoot driving up mountains to track down nomadic sheep herders and trying to get access to shoot in Orthodox churches and dance clubs. This is what we came up with.. would love to hear what everyone thinks.. we took a different direction on this piece than we normally do.
    18 points
  23. I inserted myself into the discussion last night when I probably shouldn’t have, but I do stand by my opinion that Andrew should have been invited to the Manchester event. I, for one, never felt that John Brawley was to blame for this and feel that most people on this site have been very thankful for his contributions, not just about info on the upcoming camera but his openness about the inner workings of a Hollywood set and his methods of shooting. But the disdain displayed to Andrew in this thread is mind boggling. I don’t always agree with him, but the man has wholeheartedly opened his craft and home to a countless amount of strangers for free. There is not one other site in the video community that is completely ad free and he rarely asks for a thank you. I can only imagine the cost it is to upkeep this site. I’d be a liar if I didn’t admit that I find him infuriating at times, but I would never question his devotion to his craft and his readers. With that being said, I feel JB’s reply to the events was unnecessarily rude. Perhaps there was a breakdown in communication as Andrew has already stated but for every person that felt Andrew could have handled the snub differently, they should equally admit that JB could have handled his response differently as well. BM was born on the backs of hobbyists and enthusiasts. We paid for the R&D of the Ursa Pro with every Pocket or Micro we bought. As much as we appreciate their inexpensive cinema cameras, they are only available because we decide to purchase them... it’s like a television show, it only exists at the behest of its viewers. But in the end, they are both artists and artists are passionate, honest and sensitive people... they must be to put themselves and their work out into the world for scrutiny.
    18 points
  24. Thanks Karim And Dan, yes webrunner is right. It's a cultish following around the Pocket camera. For example, I understand that Facebook targets each post to a subset of my followers on the EOSHD Facebook Page, depending on the subject. It's automatic, I don't have any control over it. But a lot of pitchforks came out for me today on Facebook which confused me because EOSHD supporters, followers and friends don't usually behave like that.... I know why this time was different, because Facebook had targeted a Blackmagic article at the Blackmagic hardcore fanatics and they didn't like what I had to say. As for typical BM roll out, yes it is. Trade shows have less meaning to everybody outside the bubble. Most customers don't want to be teased for half a year or even more before they can get the damn camera in their hands. Blackmagic should stop syncing their announcements to NAB and instead put the announcement out a week before they start shipping. The irony is, here I am feeling upset about being passed over for a camera in my hands... with a hardcore of Blackmagic users saying "what a crybaby EOSHD is" when at the last few camera launches, those very same people were moaning about not having a camera in their hands, because it's late or whatever. At the end of the day, I reflect on the course this thread just took and I regret it. I stand by my hurt over the camera and snub, but I regret what's happened. Take what you read from everyone on forums with a pinch of salt including even yourself whilst saying it! And including me. I am not myself on the internet sometimes, nobody is. The internet is a weird simulation which is causing issues in real society across the globe all the time. It's not real life, it's a machine-assisted facsimile of it. John Brawley and I would not have behaved the same in real life. The internet is an argument generator and a distorted mirror and I might indeed have to shortly go to the pub and have a stiff drink.
    18 points
  25. It sounds like you’re threatened by this camera so you’re making sure you point out any and all shortcomings you can. Isn’t sissy a bit emotional ? You’re reaching. Some people will be happy with 10bit 422 as their maximum image quality as long as they have a tilt able screen and autofocus. Most serious image makers know that 12bit raw and 10 bit ProRes for half the price trumps the MILC features you’re desperately trying to remind everyone your precious GH5s has. Mostly because “filmmakers” don’t tend to use those features anyway. I don’t use AF. But I shoot narrative drama. What I need isn’t what others need. For the majority, they will prefer the utility of the form factor, longer battery life, AF and IBIS on the GH5 and will find the bare minimum for serious work 400Mbps codec to be good enough. People who care about image fidelity will likely prefer what a Pocket 2 produces side by side and will also decide that they can work around the shortcomings that pertain to the way they work. The same way others will prefer to work around the shortcomings of a lower bit depth more compressed and sub sampled image because other features are important to them. On board batteries on an Alexa mini on my last show were lasting about 40 mins by the way. I guess you’re calling me a sissy. JB EDIT by the way, I don’t think it’s at all appropriate to use sissy, a word that means effeminate man or homosexual. Maybe you want to change that.
    18 points
  26. Stuck at home like many, so I made my daughter the actor and my wife the grip and script supervisor What have you all been up to during these strange times?
    17 points
  27. KnightsFan

    Sigma FP

    The small hole is actually to reduce the amount of material required, thus saving 0.23 cents/unit on manufacturing costs. It's the compromise they made in order to afford the 24p license.
    17 points
  28. It begins. Evaluating new cameras isn't my favorite thing, so I thought I'd share the pain. I've got a lot of work on ATM, so this will be an ongoing project. I might even end up making a youtube vid ?. I've been shooting with the 5DMk3 ML raw exclusively for many years, you can check out some of my recent work here: A few contenders have come along over the years like the A7s and BMMCC, but all have failed to measure up to the 5DMk3 with Magic Lantern raw. These jobs I did recently were particularly gruelling, up to 19 hour days, days on end, uncontrollable lighting, no recce, no crew, constantly on the move, a great stress test for any camera or operator. The weaknesses of the 5D have never been more apparent. With a slight lull in the storm, and some technical hurdles in upcoming work, I took the plunge and bought these two sought after bodies. Not being able to get a Pocket 4K for like 8 months allows a lot of time to pixel peep and contemplate the future. Pixel peeping is one thing, but you really don't know if it's for you until you test it for yourself, or wait for a crash test dummy like me to do the work for you. Very early impressions: I have to say that of the 2 cameras, I was more excited about the arrival of the Pocket 4K, at least until I remembered the lens adapters I ordered haven't arrived yet. I rummaged through one of my four film detritus drawers and found 5, yes 5 ? Nex adapters (remnants from a brief Sony affair) but not a single M4/3 adapter of course. So I unboxed the P4K, grabbed one of my Canon batteries, and fired up the little beast. The fan: super quiet, probably the quietest fan I've ever heard, a non issue. The firmware: 6.2.1, no CDNG for me. For those who haven't heard: BMD have put a new touchscreen in the latest cameras that only works with 6.2.1 firmware. I'm not really fussed, the Braw stuff I've seen looks really good, and the file sizes are amazing, 4K Braw files are smaller than 5DMk3 raw 1080p files. UHD 12:1 Braw files are roughly the same size as 1080p ProRes HQ files,and 200Mbit/s 1080p X-T3 HEVC files. I've had the X-T3 for a couple of days and I got an 18-55mm f/2.8-4 OIS lens with it. This lens is fantastic, creamy bokeh, and the OIS is amazing, I can get super steady shots at the long end handheld, I know I'm very late to the party with OIS, but wow. Can't wait to put an Iscorama anamorphic on this puppy, no 58-52mm step down rings in the detritus drawers either ?. Low light on the X-T3 is a mixed bag: up to 8000 ISO the noise is tolerable, film-like chroma grain, no fixed pattern noise, however: the X-T3 image falls apart in the shadows, that's a big minus. The other image related issue that comes to mind is: white balance. I had to go digging into the detritus drawer for a grey card! I mean srsly, what's the world coming to? I haven't used a grey card in years; I'm so accustomed to shooting raw I just don't even think about white balancing anymore. I haven't drawn any conclusions on custom white balancing yet other than it's absolutely necessary with the X-T3 ?. Ergonomics: the X-T3 is terrible in big hands, I rarely handhold a camera, rolling shutter micro jitters are a thing, but the OIS lens makes it doable. The Smallrig cage has a handgrip extension, so that may help. The P4K is much better in the hand. Stay tuned.
    17 points
  29. Nice piece. Oh and the cheque is in the post for this plug Mind you, I hope the notes he was taking were along the lines of "lets track this maverick down and license it" rather than "lets track this cheeky bastard down and sue him" !
    17 points
  30. Will be joining the YouTube party at some point.
    17 points
  31. "Pocket 4K footage is precisely transformed to match the color science of the Arri Alexa, without compromise. This is achieved without artifacts, while introducing a smooth, organic rolloff." For the better part of the last year, I've been working to map the color of P4K BMDFilm to match my Alexa's LogC, as measured under sunlight and halogen. To do this, I wrote an interpolation program in C++ that can accept an enormous amount of data (~40k samples per camera), and interpolate smooth internal contours, or 'waves' between them. Exposure compensation conversions were made with the same interpolation engine (transforms replicating sensor color response with variant exposure). Another significant element of the project was to recreate Arri's Rec709 to maintain the entirety of recorded LogC gamut, in a film-derived envelope (for the display variations). This was particularly difficult, as the correct RGB primary behavior needed to be exactly replicated within contiguous 709, but smoothly diverge to HDR-like handling of far gamut (where Arri's Rec709 ends). This new envelope (EC Gen.4) is particularly impressive, and I may release it for the Arri, as it is significantly preferable to normal Arri Rec709. P4Ka PDF Emotive Color
    16 points
  32. So i said i'd post some stills, these are basically ungraded. This frame is in a sequence with car lights, i like the tonality of this very subdued moment. Shot 12bit to manage shadow tonality. From a different point above. All shot on a 50mm M Summicron probably wide open. I think i hit the saturation slider here in Resolve. But this had car rolling over camera. It's a 21mm CV lens and i see some CA aberrations from the lens that i would deal with in post. But i'd never let a car run over a Red! shot on an 85mm APO off a monopod. Nice tonality again and it's day light from windows with some small panel lights bouncing and filling in A reverse of the above. Some fun shots. I think the true benefit of something like the fp is the speed at which you can see something and grab it. Using it just with an SSD plugged in and manual M lenses gives a more spontaneous feel. Now most of the film will be shot on Red, in controlled conditions with a crew and that's the right approach for multiple dialogue scenes and careful blocking. But the fp has it's place and i may hand it too someone and just say grab stuff. cheers Paul
    16 points
  33. Here's a little video that I put together for those green chair shots.
    16 points
  34. kaylee

    Thanks guys

    i feel like im starting to get the hang of this filmmaking thing, for the first time, with the project im doing right now i dunno how i couldve gotten this far without andrew, eoshd, and all u guys on this board helping me, and answering my stupid questions it means a lot i just want u all 2 kno ? thank you
    16 points
  35. Thanks for the positive feedback. Much appreciated. Please buy it I've run out of gaffer tape making this one so that integration will have to wait for a while.
    16 points
  36. I am certainly not bigger than a camera company, or more important than Blackmagic and I think people may have seen the hysterics as a bit silly. I accept that yes, possibly I have shot myself in the foot. Having said that, EOSHD is bigger than me as well and is a real community. I was standing up for the community and not just for myself. This was a perfect storm for me. A combination of several factors which caused me to get upset enough to write that article... First the Canon EOS R launch and the new levels of invasive of PR offensive we are seeing from the camera companies to quell dissent and turn even Caleb Pike into a "it's not perfect but WOW what a great camera" kind of guy. Rather than the person he should be, a "1.8x crop sucks" kind of reviewer. Secondly the overwhelming feeling of shithead sycophants climbing above my site, in the VIP lane, completely undeservedly. Thirdly the geographical positioning of the Blackmagic event, it being on my doorstep. Next the fact Cinema5D were paid to fly in. I could have walked in. Finally, the John Brawley factor on here and the lack of support from most of my own readers, honestly all this is enough to give someone a nervous breakdown. It's hard to really get across how I feel, because it is a weird situation and I think the internet is a bit weird as well. In real life, people don't say the things I say or say the things to me that I have had to put up with. People need to calm down, myself included. It's only a camera. But I do feel the future of camera and tech journalism is at stake. In fact it may already be absolutely dead. And the most depressing thing of all is that the reader is fine, unawares, and on the most part notices no issue. No, that wasn't my intention. Yes I have dug myself into a very silly hole. I'll be the first to admit that. Yes Johnnie at Cinema5D is laughing his business head off as we speak.
    16 points
  37. Is amazing. I love it. Never going back to RED unless I’m forced to by a client. Just thought I would share. The IQ is pristine, colors are great and it’s just a breeze to use. Will post a few stills here in a day or two.
    15 points
  38. Well, its been a while and its changed quite a bit.... But this is your official 7 day countdown for pre-orders opening on 12/12/19. As the festive season is approaching then in true advent calendar style, open this thread every day for more stuff. PBC Tease 1.mp4
    15 points
  39. Here is a VFX heavy short film I shot on the Samsung NX1 years ago, finally decided to finish it and get it online so here it is! The last scene is the canon T3i all lenses used are the rokinon 24mm f1.4 and Canon 50mm f1.4 Watching in 4k is strongly recommended as YouTube loves compressing things
    15 points
  40. I finally released my last feature in streaming. It's now on Amazon's Prime Video here: https://www.amazon.com/dp/B07ZHRZ782 It's a Drama/vengance/thiller type I little bit of history with this. I started to shot this film in the end of 2013 (yes almost 7 years). It took almost 3 years in production. It was shot with a couple of Nikons DSLRs and Super 16mm film. Since it's first screening in the Mar Del Plata International Film Festival in 2016, the film was going around thru some festivals and other screenings. It finally got a theatrical release locally (Argentina) in march this year. It's preaty hard to get distribution to some "kind" of movies. As you can see, this is a very looong process when you are a "newcomer" in the business, but you just to keep pushing. I still have in plan try to reach some other platforms. Only time will tell.
    15 points
  41. Hallo friends, here is my contribution. I hope you like my final film. Looking forward to the great pleasure of exchanging experiences and technical odditities and tricks once Andrew gives the signal for releasing info next week. Thank you for your beautiful films, discussion and the awesome spirit. Thanks Andrew and everyone for inspiring us to film something personal. Here is my labour of love, shot last week and edited over night until just now cheers! Thank you very much!
    15 points
  42. NX1 is actually more advanced with H.265, 6K readout, 1080/120fps and it is 5 years old.
    15 points
  43. So, as you may recall, I have an interest in tweaking the combinations of the basic profiles in the camera along with the contrast/sharpness/saturation/NR parameters. The purpose of that is basically a mining operation to see if there are some combinations that perhaps may not be intuitive but whose interaction may yield pleasing results. Outside of the usual "select cinelike d, reduce everything to -5" etc stuff that we all do, who really knows if Natural with +4 contrast/-5 sharpness/+3 saturation/+2 noise reduction might actually be the golden ticket? I did a hardware controller last year based on a midi control surface that let you tweak the parameters in real time which, whilst offering a way of 'discovery through play', wasn't exactly ideal from a structured testing point of view. It also wasn't particularly practical (or cheap) for you to go out and replicate yourselves if you fancied a go ! Anyway, in pursuit of something a bit more structured, I created a very simple automated testing app which I thought I might as well hand out in case anyone else is interested in this sort of thing. Its Android only so you elitists with that other phone type are out of luck for now As its also a bit of a utilitarian thing that was only really designed for my own meddling, its not exactly pretty either but it works. Mainly. OK, so here is how it looks, how to use it and what it does. First things first, obviously, is to enable the Wifi on your Panasonic camera as per if you were using their app and then go into your phone/tablet and connect to it. In the ProfileStepper app, you then press the "Connect" button and it will take control of the camera. It might complain the first time about approving the connection but if it does just repeat and it will be fine. Once connected, you press the individual parameter buttons and select the range that you are interested in so in this example we have set it to be using the base Natural profile and how it looks with all permutations of Contrast from -5 to +3, Sharpness from -2 to 0, Saturation from -5 to +5 and NR from -5 to +1. Next up is to set if you want to use Stills or Video, which we toggle between by pressing the Stills button and then to create a delay (of between 1 and 10 seconds) between shots you press the button (currently set to 2 seconds) and select it. When you are happy with the settings range, press the Start button and the app will begin compiling the list of commands it needs to send to the camera. As this is a variable amount of time (in our example there are 2079 commands ) you may see a progress pop-up before it proceeds to the playout screen. Be patient. The progress screen will then appear and display the value of each parameter in the set it is sending to the camera and the current progress (in this case we are on set 4 of 2079). After it sends each set to the camera, if you have the mode set to Stills it will then fire the shutter on the camera. Obviously, make sure you have a decent memory card capacity if you are testing a lot of permutations! If you are set to Video mode, a recording will begin on the camera as soon as you pressed the Start button and the changes will all be recorded into this one recording. This is where the Delay function becomes useful as it determines how long each setting is held on the video as it progresses. As with the Stills mode, be careful regarding capacity as if you have 1000 permutations with a Delay time of 5 seconds then, well.... In either mode, pressing the Stop button will abort and return you to the main screen and if you are in video mode it will stop the recording. The purpose of the progress screen is not just to provide you with a countdown to whats going on but also meant to act as a slate so that you can put your phone/tablet in your test scene and the settings will then be embedded in the images/video when you review them. This is an example frame from a GX80 to illustrate. There is a 3 second delay built in to the beginning of the command playout process to allow you to do this but obviously as the camera is being controlled over Wifi you can place the phone/tablet in the scene and press Start from there anyway. This just gives you a chance to get your hand out of the way ! So there you go. Its a bit of a niche app to say the least but might be useful for some. Bear in mind, its not really meant to be about analysing every single permutation in one go (though it can do that if you want) its more about helping you to look at how more targeted ranges of settings interact with each other (such as Saturation and Contrast in a specific Profile for example). And what exactly is the Noise Reduction bringing to the party in terms of colour shifts and sharpening etc. Download link is here https://mega.nz/#!Vux3UDIK!TPJNYc8gJ6YrQY5T8xkZRAQ_IpBac16xIIGe3ET6R0Y You'll need to set your device to install apps from non-Play store sources etc. Its completely free, no ads or any bollocks like that. As I say, its my own test tool and wasn't designed for general release but thought it might be useful to share. If nothing else, its a quick way to get the Cinelike D hack on to your camera! Because its just a quick and dirty test tool, there is no particularly elegant error handling going on (other than telling you that you haven't connected the camera) so if it throws one up just quit and restart it. If you set the To range to be lower than the From range (i.e. the From is -3 and the To is -4) then it won't execute the commands so don't do that. NB - The eagle eyed amongst you may have spotted the Bracket function at the bottom of the screen. This does exactly what you might expect but its unrelated to the main function but I needed it to test something so you get it as a bonus! You set the shutter speed and then the 1/3rd steps above and below and press Bracket and it takes the required frames with suitably altered shutter speeds. Its a bit flaky on some Panasonic cameras because they don't all allow the 1/3rd shutter changes so your mileage may vary and, as I say, you can largely ignore it.
    14 points
  44. Yep, it's not EOSHD that's the problem it's me! I need to get my enthusiasm back. It's been a tough time. Thanks for the comments guys, it is helping me figure things out a lot.
    14 points
  45. Here are some frame grabs from my first feature length film Bad Decisions. I started on the GH4, then shot some scenes on the GH5. I will finish this next year with the S5 and S1H if COVID-19 doesn't turn into COVID-20. 😬 I'm probably going to go straight to Amazon Prime. My budget thus far has been $10K and I have another $3K or so for the last two scenes. As so many of you know, no ifs, ands or buts about it; filmmaking is fucking hard! This is probably why this is my last one. I've been discouraged so many times that I had pretty much decided to delete the whole film and just quit altogether. But looking at these grabs, and knowing that I lit that, I blocked that, I wrote that, I shot that and I directed that gives me the courage to complete what I've started. It would be nice if I break even, but even if I don't, I can say that "Hey, I did that!" And boy I didn't do that alone! I had so much help from friends, family and complete strangers that it's too much to even count! They were angels, there just when I needed them, and for not a moment longer, There was one scene, that I was shooting straight guerrilla style. I needed to shoot on three city blocks at night, and I had to light it, and there was a gun scene that kinda made me nervous for the safety of the cast and crew. We have no permit process in my city, so I went to the police department, and explained what I was doing that night, and they were like "Ok". As soon as it got dark around cast and crew call time was at 6pm. We went to the neighbors houses and let them know what we were doing. We started blocking, and laying down markers for lights tripods and actors. It got dark at 9pm, and we started shooting. We were shooting in moving cars, had special effects, and every scene was lit. We even faked a window getting shot out. We wrapped that scene at 5am the next day, right before the sun came up. Do you know for the entire time we were shooting, not a single car drove up any block visible? It's like we rented 100 homes, paid everyone to stay inside and blocked off the area for a 1/4 mile radius! God was most definitely on my side that day, and it was one of the best scenes in the entire film!
    14 points
  46. This thread details the teardown process, modifications made and some important findings: http://c.tieba.baidu.com/p/6848700307?pn=1 He replaced the two thermal pads that did not fully cover the CPU with a dollop of thermal paste and noticed significantly better and more even heat dissipation. Most important finding: despite the temperature drop and improved heat dissipation, 8K/4K HQ still cut off at 20min mark, suggesting a firmware limit is also in place.
    14 points
×
×
  • Create New...