The Dancing Babamef

you asked like the sensor in A7S3 and FX3 would be different. They're not.

I recently shot this cover song and music video in 8K RAW on the R5C with a Great Joy 1.8x Anamorphic (50mm). My daughter sings here and I recorded the music, so I was occupied with a lot of things aside from the camera. Having said that, the camera performs really well for what it is and is a great addition for those who already own Canon glass. It's not going to replace a proper cinema camera in terms of the best DR or latitude, but it is an amazing tool and the in-camera anamorphic de-squeeze is a priceless feature. The video is uploaded in 8K so choose that for best quality:
 

With today's news, I feel like I made the right choice going with the Z9s, not just for now, but for the future. 

This is a ridiculous post.
What is the context? There are some situations with some camera/lens combinations in which AF is undoubtably superior. Indeed, AF can make shots which would be hard if not impossible with MF straightforward. There are, equally, some situations when MF is perfect. I prefer MF lenses but I regret that preference time after time - there are things I’d like to do but don’t have the talent or skills or resources to do with MF.
To make a blanket statement about your experience with no context is nonsense. 
Your scoop is possibly better used to serve mashed potato.

tell me why you're comparing film and digital cameras? a film camera on a tripod makes it better than current mirrorless cameras? did i get that right?

What a book! 😂

What a book! 😂

Bit depth and dynamic range are different. Apparently n-log can only hold 13 stops. But tbf not many cameras are exceeding that anyway. 

Whats the point of wider profile when read out is still done at 12bit? 

Hopefully it will get all the features, and none of the resolution 🙂
The Z7 III meanwhile, I cannot see how they will make that fit under Z8 without crippling it, and how they can make it fit above Z6 III without crippling the Z6 III so that there's a gap for the Z7 to fit in between that and Z8!
So Z8 might yet turn out to have upper hand on both.
Let's see how hard they swing the cripple hammer

you probably want to enable HW accel, that puts the strain on to the GPU not the CPU.

Recently there's been a lot of action cam posts on the forum, and I'd like to take the focus back to cinema.
The action cam stuff and GoPro is a very different type of tool and belongs in a different place.
So I kindly request @Emanuel that you stop with all the frequent outlinks to drones and action cams, and the very spammy YouTube content.
Thank you.

Was dead a long time ago. I was a kid watching their videos with my D5100. Then Alamby left, Then Kai, Then Lok. New people popped in but they didn't have the same energy. I unsubbed and forgot about them, subbed individually to Kai and Lok. Literally the same thing with Machinima and the crew that was Bruce and Adam.

I do that on my Z9. Shooting bank A is 8.3K60p and B is for 4.1K120p both RAW. 

In my field of work I couldn't get the Z8, even if it wouldn't overheat, but it's the batteries for me that sealed the deal. I used a Z6 for enough time and worrying about taking extra batteries on a 3 hour shoot and interrupting video recording to replace a battery. I was ready to move to the big boy.
I'm not a hardcore professional but even now as just a hobbyist I need the Z9 more and multiple times I've had to switch to the vertical shooting position with my 200-500 and twisting my hands with the same lens on the Z6 was enough for me to realize that there is a better way.
And now I only have 2 18C batteries with me. 1 is enough to cover a day with ON/OFF 8.3K RAW video recording. 

In my field of work I couldn't get the Z8, even if it wouldn't overheat, but it's the batteries for me that sealed the deal. I used a Z6 for enough time and worrying about taking extra batteries on a 3 hour shoot and interrupting video recording to replace a battery. I was ready to move to the big boy.
I'm not a hardcore professional but even now as just a hobbyist I need the Z9 more and multiple times I've had to switch to the vertical shooting position with my 200-500 and twisting my hands with the same lens on the Z6 was enough for me to realize that there is a better way.
And now I only have 2 18C batteries with me. 1 is enough to cover a day with ON/OFF 8.3K RAW video recording. 

I haven't shot with either R3 nor R5 but I have shot with Nikon 5100, Z6, Z6_2 and finally with the Z9.
 
I chose Nikon because the Z glass in my mind is the perfect system. You have affordable 1.8 glass that doesn't look, feel or render as a 50$ kit lens. I have shot with the 50mm 20mm and 85mm wide open and can be 100% satisfied with the results. I have also used the 85 1.2 but I only bought it because I need the extra light.
I have also shot extensively 8.3K NRAW, ask me about it. 60fps and 24fps (23.98) clips and graded them accordingly. For me it's the perfect camera, even more as the switch from photo to video takes under a second (in my test case with fast Angelbird media). Also I have shot in H265. If you watch Camera Conspiracies that guy must be editing on a laptop or something because the H265 from my Ninja on Z6 and on Z9 were not a problem and I didn't create proxies. 
Without the Z8/Z9 the R5 would be a no brainer because of the internal 8K RAW but now a basically R5 but with a bigger battery, no overheating and fast switch. I think it's obvious.

I shot a bunch of footage in the summer and the files were wonderful. I haven't tried shooting in low light nor in grey cloudy weather because if the weather is like that then I don't even bother to take the camera out. Every picture tends to look flat and ugly. 
I was able to work with the colors and it wasn't hard to create a faithful look even when I didn't have a correct WB/tint during the shooting because I use a 200-500 and I can't go somewhere to meter the correct values. 
I work with a calibrated PA32UCX and I output SDR. Nothing major just before and after grades and for myself and social media. I have however used a RAW video from an R5 and it was really noisy even as it was shot on a sunny beach. With the Z9 you can lower the ISO to 200 from 800 and in Summer it was really helpful to get closer to the 180deg rule.
The Z9 will be a good camera for years to come. It has internal RAW at 8.3K and its RAW format is natively supported in Resolve. I have my trust in Nikon. Only issue I would have is the lens mount as getting a PL to Z was quite tricky but eventually I found an online shop with 1 in stock.

I shot a bunch of footage in the summer and the files were wonderful. I haven't tried shooting in low light nor in grey cloudy weather because if the weather is like that then I don't even bother to take the camera out. Every picture tends to look flat and ugly. 
I was able to work with the colors and it wasn't hard to create a faithful look even when I didn't have a correct WB/tint during the shooting because I use a 200-500 and I can't go somewhere to meter the correct values. 
I work with a calibrated PA32UCX and I output SDR. Nothing major just before and after grades and for myself and social media. I have however used a RAW video from an R5 and it was really noisy even as it was shot on a sunny beach. With the Z9 you can lower the ISO to 200 from 800 and in Summer it was really helpful to get closer to the 180deg rule.
The Z9 will be a good camera for years to come. It has internal RAW at 8.3K and its RAW format is natively supported in Resolve. I have my trust in Nikon. Only issue I would have is the lens mount as getting a PL to Z was quite tricky but eventually I found an online shop with 1 in stock.

By ignoring it and fighting it through the courts.
 

I haven't shot with either R3 nor R5 but I have shot with Nikon 5100, Z6, Z6_2 and finally with the Z9.
 
I chose Nikon because the Z glass in my mind is the perfect system. You have affordable 1.8 glass that doesn't look, feel or render as a 50$ kit lens. I have shot with the 50mm 20mm and 85mm wide open and can be 100% satisfied with the results. I have also used the 85 1.2 but I only bought it because I need the extra light.
I have also shot extensively 8.3K NRAW, ask me about it. 60fps and 24fps (23.98) clips and graded them accordingly. For me it's the perfect camera, even more as the switch from photo to video takes under a second (in my test case with fast Angelbird media). Also I have shot in H265. If you watch Camera Conspiracies that guy must be editing on a laptop or something because the H265 from my Ninja on Z6 and on Z9 were not a problem and I didn't create proxies. 
Without the Z8/Z9 the R5 would be a no brainer because of the internal 8K RAW but now a basically R5 but with a bigger battery, no overheating and fast switch. I think it's obvious.

No. RED partners with Tower Semiconductor to design and manufacture CMOS sensors.

Yes, he's back! 😃

been aaaagggeeesssss since the last upload
 
oh wait, he had one from just two months ago that I missed (which was removed, then added):
 

Red licensed their RF mount.

I used the R5c with the full cage and the FxLion One Battery on top of the cage on a Ronin S quite a bit and depending on the lens is a bit at the limit with the clearance. The EVF of the R5c is stick out quite a bit and the cage need some more space on the motor side.

Sold the S and now I use a RS3 Pro and due to stronger motors and longer harms I can mount whatever with no issue. For my Africa project I did use a lot with the 70-200 and no problem at all to balance and still have enough clearance to go underslung.

Although Smallrig claims the cage to be compatible with the DJI arca plate ,mine is not and I tested with RSC2 (too small for this camera anyway) and RS3 Pro plates and due to the security pin both cannot take the cage directly. I have the R5 full cage so maybe.
Bottomline either you mount the DJI arca adapter (that comes with the gimbal) on the tripod hole of the cage or if you want something more solid you need to buy this: SMALLRIG Quick Release Plate for Arca-Type Standard Compatible with DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro Gimbal - 3154  or this SMALLRIG Camera Quick Release Plate Adapter with Arca-Swiss for DJI RS 2/RSC 2/RS 3/RS 3 Pro & for Ronin-S Gimbal - 3061.

I use the gimbal on high vibration environment quite a bit, on MTB, Motorbike, Jeep, Skii, Heli so the stronger motor of the RS3 Pro is a no brainer for my usage. For only 200g more is imo worth. The new auto locking of the RS3 and RS3 Pro seems a small thing but it makes life so much easier.