BTM_Pix

I've had a bit more of a dig about this because I was pretty sure that I remembered that the viewfinder app was upscaling to fill the phone screen. 
I had remembered correctly as it turns out the live stream resolution is only 640 x 480 so that would immediately rule it out.

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

@BTM_Pix dude, youre amazing~!

youre super cool to share all of this stuff, thank you!!!!!!!!!!!!

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

Yes, it does all of the same functions (and a few more actually) and you could fit in pretty much whatever worked ergonomically.
Once its in its finished much more compact form (just the size of the blue-ish control panel in the video) its pretty small.
You could probably gut something like this PC Joystick (which is about £15) to use the handle part which has a similar ergonomic approach to the Sony grip and mount it in there.
For me, its better as a pocketable thing but thats the beauty of it being a bit of a DIY hack, it can be a lot more custom than an off the shelf product.

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

Yes, it does all of the same functions (and a few more actually) and you could fit in pretty much whatever worked ergonomically.
Once its in its finished much more compact form (just the size of the blue-ish control panel in the video) its pretty small.
You could probably gut something like this PC Joystick (which is about £15) to use the handle part which has a similar ergonomic approach to the Sony grip and mount it in there.
For me, its better as a pocketable thing but thats the beauty of it being a bit of a DIY hack, it can be a lot more custom than an off the shelf product.

Yes, it does all of the same functions (and a few more actually) and you could fit in pretty much whatever worked ergonomically.
Once its in its finished much more compact form (just the size of the blue-ish control panel in the video) its pretty small.
You could probably gut something like this PC Joystick (which is about £15) to use the handle part which has a similar ergonomic approach to the Sony grip and mount it in there.
For me, its better as a pocketable thing but thats the beauty of it being a bit of a DIY hack, it can be a lot more custom than an off the shelf product.

"It poses more questions than it answers" -- That's a great way to put it. Overall I agree. On the hardware side of things, though, I think the investments would be minimal. All modern laptops bring fast WiFi, extremely fast processing, and fast storage. It then comes down to software to solve the problem. I think a proof-of-concept could be done in python in a matter of days or weeks. What remains unclear to me is whether or not the resulting stream is of good enough quality (fps and "bitrate") to be worthy of recording at all. A dedicated piece of hardware is far more elegant, of course, but also pricier. And I think one purpose of these hacks is always to save money by putting in slightly more effort on the user's side.

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

Cool.
I've got an arduino development board called an Esplora thats got lots of interesting sensors built in to it. If I did this remote on it I was going to incorporate the temperature sensor on it to give the Panasonics a Sony emulation mode where it stops the recording when there's a whiff of warm weather  

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

Great stuff!! Well done!

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

nothing special, but i really like the cinelike d hack!

That's a great looking development,well done

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly  
 
 

COOOOOOLLLLLLL!!!
Whats the main board? Raspberri? Arduino?
Congrats, your gadget  is super!

So as I've hinted more than a few times in the other thread, the discovery of the Cinelike D and other bits and pieces for the GX80 etc was actually a bit of a happy accident while I was trying to do understand the Panasonic wifi stuff for something else.
And here is that something else.
Well at least a prototype of it but it is fully functioning and will just be finessed a bit more.
Basically, its a wireless hardware remote for the G series cameras that operates over wifi and can currently control record start/stop, shutter speed as well as aperture and focus if you're using a native lens, including a single shot AF switch.
For the non-Cinelike D cameras that can now be hacked to have Cinelike D there is also a dedicated button to toggle it on and off so you don't need to mess about with browsers and computers or smartphones anymore.
Focus and aperture control are done on a joystick and everything else is switches.
I'll be putting a layer switch on so that it can be toggled back and forth to a different control mode for ISO, WB and other stuff.
As this is the prototype it is nowhere near the finished piece and it will be reduced in form factor to just be about the size of the control board. Power is by any USB source so there are billions of options.
There is a lot more finessing and feature enhancement to go on with regard to the focus control (and yes, I know exactly what you'll all want it to do !) but the hard part is done now.
It does support the display of the values on a screen and I'll be sorting some options out for that.
The purpose of this gadget is primarily for use with a gimbal but it can also be really useful on a tripod bar for anyone shooting live event stuff. For cameras with inbuilt lenses I'm going to add a zoom mode on the joystick.
A very quick very rough demo so you can see it in action.
Any lag you might see between me operating the controller and the camera video is just a sync issue between me throwing the two recordings on very quickly