Jump to content
Sign in to follow this  
John Palmer

Dyaliscope Junior 16 - Focusing is stiff, need some insight

Recommended Posts

Hello! I bough this Dylaiscope Junior 16 anamorphic projector lens from ebay last week for $51, I was very surprised No one ever out bid me. Optically it is in pretty good shape, some minor cosmetic scratches on the body. The main problem I have with it is the focus ring is fairly difficult to turn. I basically need to take it off the mount to set focus everytime because Im afraid I will put unneccesary stress on the lens and mount attached to the camera.

post-34953-0-60341500-1404155263_thumb.j

 

I was just wondering if anyone has any experince or knowledge about lubricating lenses. I already know it is generally not a good idea for a non profession to take apart an anamorphic lens since all the elements need to stay perfectly alligned, but I was wondering if anyone knows the function of the 3 screws towards the back of the lens seen in the picture. I can sorta see a bar inside the lens that they seem to be holding. I have taken apart old Canon fd mount lenses before and reassembled with no issue but Im sure this is a bit more difficult.

post-34953-0-14013600-1404155265_thumb.j

 

What would happen if I were to loosen those screws?

It seems to me that this lens has probably been sitting somewhere for a very long time and the original lubricant has become less oily or something. I removed the face plate of the lens with all the writing on it and removed some of the grease and found it was a greenish shade, which I read from other forums is a type of grease known for sticking over time, not sure if it is the same grease used throughout the lens though. From what Ive read Dyaliscope lenses are of pretty good quality but havent been able to really find much about them.

 

Any advice or ideas would be appreciated.

Share this post


Link to post
Share on other sites
EOSHD Pro Color for Sony cameras EOSHD Pro LOG for Sony CamerasEOSHD C-LOG and Film Profiles for All Canon DSLRs

 

What would happen if I were to loosen those screws?

 

 

A world of pain.

 

If you are unsure, I'd say maybe leave it alone...resell it with a clear description of the focus stiffness for a buyer to allow an informed choice on repairing it or not.

 

If this does not interest you, and you fancy attempting a repair yourself -I'd say the best shot to try first is to carefully go in from the front, using a proper tool (spanner wrench to unscrew front retainer ring).This will allow removal of the front optic and allow access to the innards. By unwinding the helicoid you may be able to get access to the movement and thin the old grease with a TINY amount of lighter fluid and swab away some of the old grease with Q-tip/ cotton bud. Then some fresh helicoid grease added. The front optic will have to be orientated back again once you are done, which if you have not done before can be very time consuming and risky - as the edges of the optic will chip very easily.

 

Basically I would not recommend trying anything if you are unsure, it sounds like a full disassembly/ clean and re-lube would be needed to sort out the issue properly, by someone who knows their onions.

Share this post


Link to post
Share on other sites

Thanks for the advice fellas. I sorta figured those screws would not help me. Even though I only spent 51 bucks for it and since it still turns, just not as smooth as id like, I am probably going to leave it alone until I can invest in something better. Ive been shooting some stuff with it and it hasnt been slowing things down too much anyway.

 

There is an older gentleman in my town who used to make lenses in the UK and owns a camera rental business who might could help me out

 

 

Beware, the front optic is probably glued in with optical cement.

just for future reference, What would it be glued to? An inner barrel or something?

Share this post


Link to post
Share on other sites

Construction of the inner tube goes like this:

 

The inside of the tube and the edge of the front optic is wetted with glue. The front optic is then inserted into the tube, followed by the front retaining ring which is screwed in.

 

The tube is stood vertically until dry/cured with the retaining ring acting like a shelf.

 

This is why when you see scopes with tool marks on the front retaining ring you know the skill level of the last tinkerer ;)

 

 

This scope is a very nice optic with pink flares. Yes pink, just like the pink floyd from lightning and plasma balls

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By PBR
      Hi everyone!
      I wanted to showcase my passion project "The Night Knows No Shore" here on EOSHD. I've been a long time reader of Andrew's blog and it was his footage that inspired me to get an Iscorama a long time ago. 
      After doing tests with it for a while I came up with this idea for a movie. And you can now see the result on youtube: 
       
       
      It's a project made by one single actor and one single crew member (me) with one single focal length (a Canon FD 85mm 1.8) and one single focus anamorphic lens ( Iscorama pre-36). Don't expect much action. It's a slow film with lots of monologues and no real plot. It's about one young man's thoughts on society, religion, art, philosophy, life in general. Have a look. If you don't like all the "pretentious" talking, maybe you like the footage. Let me know what you think. If you have any questions, just ask. Enjoy! 
       

    • By Dave Reeve
      What are the best smartphone lenses out there and are there any decent optics tests online? I know brands like Moment lead the way (perhaps with their marketing) but are there better options for an iPhone 11? Looking for quality over price although of course when it comes down to it price will be a concern. Thanks.
    • By mnewxcv
      looking to sell my nx 16-50s lens. Good condition overall, link at the bottom with pics and description in my ebay listing. Will see to an EOS member with good feedback for $600 shipped via paypal OBO, USA shipping.
       
       
      pics can be seen on my ebay listing:
       
      https://www.ebay.com/itm/174229807044
    • By Carlostheepic
      Looking to buy a used FVD-16A (CANON).
       
       
    • By Richard Peretti
      Hi guys,
      Found this packed away in the loft. Haven't used it in years. Open to offers, UK only please.
      Cheers







×
×
  • Create New...