Sage

The latest page to the PDF is attached. The problem, I believe, is that GH5 VLog L footage has an unusual full luminance flagging for video footage. This was corrected to read correctly in Adobe programs in May of this year. The key for VLog L and LogC footage is that full white (pointed into overblown light source) places below 768. If its above 768, the levels are set to video (which need to be set to 'Full' or 'Data' in Resolve)
I can't give away my secret sauce

Emotive Color V5 'SPECTRUM'
The V5 'Spectrum' update is ready. The V5 emails are going out now (let me know if you haven't received it). It is the culmination of four years of engine development, and I hope you enjoy!
Emotive Color Component ('EC709')
EC709 component (Full/Theatrical) rebuilt with new engine, allowing accurate, uniform far gamut projection of Arri display table Arri Rec.2020 now used as the color target (projected within EC709 envelope); results in deeper saturated red and blue that are otherwise clipped in Arri's Rec.709 High Scale is now Full Scale (unlabeled); a direct replacement for LogC+Rec709, with notable advantages (aesthetics and gamut preservation) New Classic 'Soft' and 'Hype' variations (like V3-era 'Soft' and 'Main') Refined natural saturation model Core LogC
Fully realized uniform far gamut projection from known lower saturation samples (solves issue that caused saturated orange to twist towards red) New rolloff math; allows grayscale reconciliation of high saturation brightness values (only available for interpolated .cubes; not achievable in Matrix) Added final, fourth calculation pass (post-smoothing), which allows absolute accuracy to known sample points in final render (while retaining smoothness) Corrected an issue that allowed smoothing algorithm to clash with a 'safety lock' on grayscale hue, that could result in red-green banding near the grayscale (especially with 33x under Trilinear Interpolation); now fully smooth regardless of grayscale Misc.
New Ceiling Modifier [POST] files; allows variable highlight compression New 'Natural' profile [PRE] for GH5 (shares settings with Cine-D: -5 Sat, 200 Iso) Remade all PREs (picture profiles / exposures) Revised Pdf; Important: DaVinci Resolve - Enable 'Tetrahedral Interpolation' under Project Settings > Color Management > Lookup Tables   (allows 65x performance with 33x cubes; complete gradient smoothness - FCPX has this as default) Remade Premiere PREs with new measurements (to reflect 2021 Premiere's improved codec color); no 8-bit VLog or Cine-D PREs needed Significant revision to Premiere Pdf guide; Advanced layering section is no longer relevant, use Lumetri's luma curve (improved significantly) Gradient Test is now 16-bit png (compatible with Premiere) rather than tif Entire Matrix PowerGrade now printed directly from the engine (complete reverse-engineering of .drx format): Precise values entered directly into the curve interfaces, at maximal point density Improved engine gamma accuracy enables significantly improved base matrices New LogC Exposures feature (true exposure gammas extracted from sample data) New 4200K PowerGrade variant If you have any videos or stills you've made that you can share, I'd love to see them!
-Alex

Emotive Color V5 'SPECTRUM'
The V5 'Spectrum' update is ready. The V5 emails are going out now (let me know if you haven't received it). It is the culmination of four years of engine development, and I hope you enjoy!
Emotive Color Component ('EC709')
EC709 component (Full/Theatrical) rebuilt with new engine, allowing accurate, uniform far gamut projection of Arri display table Arri Rec.2020 now used as the color target (projected within EC709 envelope); results in deeper saturated red and blue that are otherwise clipped in Arri's Rec.709 High Scale is now Full Scale (unlabeled); a direct replacement for LogC+Rec709, with notable advantages (aesthetics and gamut preservation) New Classic 'Soft' and 'Hype' variations (like V3-era 'Soft' and 'Main') Refined natural saturation model Core LogC
Fully realized uniform far gamut projection from known lower saturation samples (solves issue that caused saturated orange to twist towards red) New rolloff math; allows grayscale reconciliation of high saturation brightness values (only available for interpolated .cubes; not achievable in Matrix) Added final, fourth calculation pass (post-smoothing), which allows absolute accuracy to known sample points in final render (while retaining smoothness) Corrected an issue that allowed smoothing algorithm to clash with a 'safety lock' on grayscale hue, that could result in red-green banding near the grayscale (especially with 33x under Trilinear Interpolation); now fully smooth regardless of grayscale Misc.
New Ceiling Modifier [POST] files; allows variable highlight compression New 'Natural' profile [PRE] for GH5 (shares settings with Cine-D: -5 Sat, 200 Iso) Remade all PREs (picture profiles / exposures) Revised Pdf; Important: DaVinci Resolve - Enable 'Tetrahedral Interpolation' under Project Settings > Color Management > Lookup Tables   (allows 65x performance with 33x cubes; complete gradient smoothness - FCPX has this as default) Remade Premiere PREs with new measurements (to reflect 2021 Premiere's improved codec color); no 8-bit VLog or Cine-D PREs needed Significant revision to Premiere Pdf guide; Advanced layering section is no longer relevant, use Lumetri's luma curve (improved significantly) Gradient Test is now 16-bit png (compatible with Premiere) rather than tif Entire Matrix PowerGrade now printed directly from the engine (complete reverse-engineering of .drx format): Precise values entered directly into the curve interfaces, at maximal point density Improved engine gamma accuracy enables significantly improved base matrices New LogC Exposures feature (true exposure gammas extracted from sample data) New 4200K PowerGrade variant If you have any videos or stills you've made that you can share, I'd love to see them!
-Alex

Really nice Parker. What anamorphics do you use? I'm now working on a software that will integrate all steps (WB, Exp, ABL etc) to vastly simplify the workflow (and make other things possible)

Really nice Parker. What anamorphics do you use? I'm now working on a software that will integrate all steps (WB, Exp, ABL etc) to vastly simplify the workflow (and make other things possible)

That's a good idea. The Pdf can be a lot to take in for the uninitiated 🙂 With anamorphic, I've wanted to experiment with that for a long time, but have stayed spherical for the time being. I think there are some good complete m4/3 anamorphics now that aren't too expensive (relative to most).

Really nice Parker. What anamorphics do you use? I'm now working on a software that will integrate all steps (WB, Exp, ABL etc) to vastly simplify the workflow (and make other things possible)

@Sage I'm still absolutely loving this LUT, and it just keeps getting better and better! 

I use it for pretty much every single project I shoot, S1 for A-cam and GH5 for b-cam, but lately, combined with anamorphic and pro res raw, it has felt extra tasty. I just love what it does to greens, especially. These screenshots are some standouts from the past couple weeks. Thanks for all your hard work! I recommend your Alexa LUT to all my lumix-shooting friends 👌🏻

Emotive Color V5 'SPECTRUM'
The V5 'Spectrum' update is ready. The V5 emails are going out now (let me know if you haven't received it). It is the culmination of four years of engine development, and I hope you enjoy!
Emotive Color Component ('EC709')
EC709 component (Full/Theatrical) rebuilt with new engine, allowing accurate, uniform far gamut projection of Arri display table Arri Rec.2020 now used as the color target (projected within EC709 envelope); results in deeper saturated red and blue that are otherwise clipped in Arri's Rec.709 High Scale is now Full Scale (unlabeled); a direct replacement for LogC+Rec709, with notable advantages (aesthetics and gamut preservation) New Classic 'Soft' and 'Hype' variations (like V3-era 'Soft' and 'Main') Refined natural saturation model Core LogC
Fully realized uniform far gamut projection from known lower saturation samples (solves issue that caused saturated orange to twist towards red) New rolloff math; allows grayscale reconciliation of high saturation brightness values (only available for interpolated .cubes; not achievable in Matrix) Added final, fourth calculation pass (post-smoothing), which allows absolute accuracy to known sample points in final render (while retaining smoothness) Corrected an issue that allowed smoothing algorithm to clash with a 'safety lock' on grayscale hue, that could result in red-green banding near the grayscale (especially with 33x under Trilinear Interpolation); now fully smooth regardless of grayscale Misc.
New Ceiling Modifier [POST] files; allows variable highlight compression New 'Natural' profile [PRE] for GH5 (shares settings with Cine-D: -5 Sat, 200 Iso) Remade all PREs (picture profiles / exposures) Revised Pdf; Important: DaVinci Resolve - Enable 'Tetrahedral Interpolation' under Project Settings > Color Management > Lookup Tables   (allows 65x performance with 33x cubes; complete gradient smoothness - FCPX has this as default) Remade Premiere PREs with new measurements (to reflect 2021 Premiere's improved codec color); no 8-bit VLog or Cine-D PREs needed Significant revision to Premiere Pdf guide; Advanced layering section is no longer relevant, use Lumetri's luma curve (improved significantly) Gradient Test is now 16-bit png (compatible with Premiere) rather than tif Entire Matrix PowerGrade now printed directly from the engine (complete reverse-engineering of .drx format): Precise values entered directly into the curve interfaces, at maximal point density Improved engine gamma accuracy enables significantly improved base matrices New LogC Exposures feature (true exposure gammas extracted from sample data) New 4200K PowerGrade variant If you have any videos or stills you've made that you can share, I'd love to see them!
-Alex

Emotive Color V5 'SPECTRUM'
The V5 'Spectrum' update is ready. The V5 emails are going out now (let me know if you haven't received it). It is the culmination of four years of engine development, and I hope you enjoy!
Emotive Color Component ('EC709')
EC709 component (Full/Theatrical) rebuilt with new engine, allowing accurate, uniform far gamut projection of Arri display table Arri Rec.2020 now used as the color target (projected within EC709 envelope); results in deeper saturated red and blue that are otherwise clipped in Arri's Rec.709 High Scale is now Full Scale (unlabeled); a direct replacement for LogC+Rec709, with notable advantages (aesthetics and gamut preservation) New Classic 'Soft' and 'Hype' variations (like V3-era 'Soft' and 'Main') Refined natural saturation model Core LogC
Fully realized uniform far gamut projection from known lower saturation samples (solves issue that caused saturated orange to twist towards red) New rolloff math; allows grayscale reconciliation of high saturation brightness values (only available for interpolated .cubes; not achievable in Matrix) Added final, fourth calculation pass (post-smoothing), which allows absolute accuracy to known sample points in final render (while retaining smoothness) Corrected an issue that allowed smoothing algorithm to clash with a 'safety lock' on grayscale hue, that could result in red-green banding near the grayscale (especially with 33x under Trilinear Interpolation); now fully smooth regardless of grayscale Misc.
New Ceiling Modifier [POST] files; allows variable highlight compression New 'Natural' profile [PRE] for GH5 (shares settings with Cine-D: -5 Sat, 200 Iso) Remade all PREs (picture profiles / exposures) Revised Pdf; Important: DaVinci Resolve - Enable 'Tetrahedral Interpolation' under Project Settings > Color Management > Lookup Tables   (allows 65x performance with 33x cubes; complete gradient smoothness - FCPX has this as default) Remade Premiere PREs with new measurements (to reflect 2021 Premiere's improved codec color); no 8-bit VLog or Cine-D PREs needed Significant revision to Premiere Pdf guide; Advanced layering section is no longer relevant, use Lumetri's luma curve (improved significantly) Gradient Test is now 16-bit png (compatible with Premiere) rather than tif Entire Matrix PowerGrade now printed directly from the engine (complete reverse-engineering of .drx format): Precise values entered directly into the curve interfaces, at maximal point density Improved engine gamma accuracy enables significantly improved base matrices New LogC Exposures feature (true exposure gammas extracted from sample data) New 4200K PowerGrade variant If you have any videos or stills you've made that you can share, I'd love to see them!
-Alex

Emotive Color V5 'SPECTRUM'
The V5 'Spectrum' update is ready. The V5 emails are going out now (let me know if you haven't received it). It is the culmination of four years of engine development, and I hope you enjoy!
Emotive Color Component ('EC709')
EC709 component (Full/Theatrical) rebuilt with new engine, allowing accurate, uniform far gamut projection of Arri display table Arri Rec.2020 now used as the color target (projected within EC709 envelope); results in deeper saturated red and blue that are otherwise clipped in Arri's Rec.709 High Scale is now Full Scale (unlabeled); a direct replacement for LogC+Rec709, with notable advantages (aesthetics and gamut preservation) New Classic 'Soft' and 'Hype' variations (like V3-era 'Soft' and 'Main') Refined natural saturation model Core LogC
Fully realized uniform far gamut projection from known lower saturation samples (solves issue that caused saturated orange to twist towards red) New rolloff math; allows grayscale reconciliation of high saturation brightness values (only available for interpolated .cubes; not achievable in Matrix) Added final, fourth calculation pass (post-smoothing), which allows absolute accuracy to known sample points in final render (while retaining smoothness) Corrected an issue that allowed smoothing algorithm to clash with a 'safety lock' on grayscale hue, that could result in red-green banding near the grayscale (especially with 33x under Trilinear Interpolation); now fully smooth regardless of grayscale Misc.
New Ceiling Modifier [POST] files; allows variable highlight compression New 'Natural' profile [PRE] for GH5 (shares settings with Cine-D: -5 Sat, 200 Iso) Remade all PREs (picture profiles / exposures) Revised Pdf; Important: DaVinci Resolve - Enable 'Tetrahedral Interpolation' under Project Settings > Color Management > Lookup Tables   (allows 65x performance with 33x cubes; complete gradient smoothness - FCPX has this as default) Remade Premiere PREs with new measurements (to reflect 2021 Premiere's improved codec color); no 8-bit VLog or Cine-D PREs needed Significant revision to Premiere Pdf guide; Advanced layering section is no longer relevant, use Lumetri's luma curve (improved significantly) Gradient Test is now 16-bit png (compatible with Premiere) rather than tif Entire Matrix PowerGrade now printed directly from the engine (complete reverse-engineering of .drx format): Precise values entered directly into the curve interfaces, at maximal point density Improved engine gamma accuracy enables significantly improved base matrices New LogC Exposures feature (true exposure gammas extracted from sample data) New 4200K PowerGrade variant If you have any videos or stills you've made that you can share, I'd love to see them!
-Alex

Emotive Color V5 'SPECTRUM'
The V5 'Spectrum' update is ready. The V5 emails are going out now (let me know if you haven't received it). It is the culmination of four years of engine development, and I hope you enjoy!
Emotive Color Component ('EC709')
EC709 component (Full/Theatrical) rebuilt with new engine, allowing accurate, uniform far gamut projection of Arri display table Arri Rec.2020 now used as the color target (projected within EC709 envelope); results in deeper saturated red and blue that are otherwise clipped in Arri's Rec.709 High Scale is now Full Scale (unlabeled); a direct replacement for LogC+Rec709, with notable advantages (aesthetics and gamut preservation) New Classic 'Soft' and 'Hype' variations (like V3-era 'Soft' and 'Main') Refined natural saturation model Core LogC
Fully realized uniform far gamut projection from known lower saturation samples (solves issue that caused saturated orange to twist towards red) New rolloff math; allows grayscale reconciliation of high saturation brightness values (only available for interpolated .cubes; not achievable in Matrix) Added final, fourth calculation pass (post-smoothing), which allows absolute accuracy to known sample points in final render (while retaining smoothness) Corrected an issue that allowed smoothing algorithm to clash with a 'safety lock' on grayscale hue, that could result in red-green banding near the grayscale (especially with 33x under Trilinear Interpolation); now fully smooth regardless of grayscale Misc.
New Ceiling Modifier [POST] files; allows variable highlight compression New 'Natural' profile [PRE] for GH5 (shares settings with Cine-D: -5 Sat, 200 Iso) Remade all PREs (picture profiles / exposures) Revised Pdf; Important: DaVinci Resolve - Enable 'Tetrahedral Interpolation' under Project Settings > Color Management > Lookup Tables   (allows 65x performance with 33x cubes; complete gradient smoothness - FCPX has this as default) Remade Premiere PREs with new measurements (to reflect 2021 Premiere's improved codec color); no 8-bit VLog or Cine-D PREs needed Significant revision to Premiere Pdf guide; Advanced layering section is no longer relevant, use Lumetri's luma curve (improved significantly) Gradient Test is now 16-bit png (compatible with Premiere) rather than tif Entire Matrix PowerGrade now printed directly from the engine (complete reverse-engineering of .drx format): Precise values entered directly into the curve interfaces, at maximal point density Improved engine gamma accuracy enables significantly improved base matrices New LogC Exposures feature (true exposure gammas extracted from sample data) New 4200K PowerGrade variant If you have any videos or stills you've made that you can share, I'd love to see them!
-Alex

Working on it at this very moment (and a raft of updates simultaneously). Its a generational shift rolled in. I rewrote all code since the last 4.2 update; it's been a very technical winter 🙂

Working on it at this very moment (and a raft of updates simultaneously). Its a generational shift rolled in. I rewrote all code since the last 4.2 update; it's been a very technical winter 🙂

Working on it at this very moment (and a raft of updates simultaneously). Its a generational shift rolled in. I rewrote all code since the last 4.2 update; it's been a very technical winter 🙂

Working on it at this very moment (and a raft of updates simultaneously). Its a generational shift rolled in. I rewrote all code since the last 4.2 update; it's been a very technical winter 🙂

@Attila Bakos Very cool, I was on a 3770k; I switched to Ryzen last year for this very purpose. Now I'd like to swap out to one of the newest Ryzens, but they are sold out everywhere. I'm doing something atm wherein I throw enormous amounts of data in, and the renders can easily go upwards of an hour at 100% cpu. My data files are usually around 1Mb per each; these are going upwards of 50Mb atm
@zerocool22 CST is a versatile tool that allows whitepaper transforms between any two spaces. These are the manufacturer specified color spaces. Emotive is a measured conversion between two cameras (or profiles etc), such that it factors in sensor response to a light source and internal camera processing (of WB, profile, etc). Emotive has simulations of sensor LogC solely using Resolve color tools (sans CST) called Matrix. Both the interpolated conversions (with Tetrahedral interpolation enabled) and the Matrix LogC simulations are non-destructive, while Arri's Rec709 (that can be added to Matrix LogC) is partly destructive (of extreme Led gamut). CST can be either destructive or non-destructive, depending on the transform specified and relevant gamut.
CST + Arri 709:


Emotive Color

From what I've seen, ProRes Raw is slightly different. I'm planning to get a newer Raw recorder to see if a Pre is warranted, but I think it is usable.

XT3 is in the plans, indeed. At this moment, its down to documenting the process of adding a camera to the server, and then streamlining the Pdf writing process as best I can (later today). This will make a camera cycle as efficient as possible.
From the LogC alone, V4 isn't that different from V3 for the average image. When saturation becomes more extreme, V4 is quite a bit better (much, much more accurate to Alexa). And when using V4 on unintended formats (i.e. Rec709 footage), V4 holds up, while V3 doesn't. Here is a comparison with one of the more saturated images I've got (most notable shift), using Soft (most equivalent variation between 3 & 4):
V3

V4

Attila does great work, he has an excellent grasp of the technical; highly recommended
That 4K 60 sounds quite good (super-sampled 10 bit)
Ironically, I've still been working away at the EC engine, and fixing copious bugs (its inevitable that when I think a thing is finished, the work has just begun ) That being said, I think today I've fully tested it, and everything is working really, really well.
This is a GHa Tungsten LogC render from this morning; the wheels on the far left and right are completely theoretical extreme gamut, beyond what the camera can record - the ones in the center are actual log gamut (and V3 for comparison):
V4:

V3:

"Pocket 4K footage is precisely transformed to match the color science of the Arri Alexa, without compromise. This is achieved without artifacts, while introducing a smooth, organic rolloff."

For the better part of the last year, I've been working to map the color of P4K BMDFilm to match my Alexa's LogC, as measured under sunlight and halogen. To do this, I wrote an interpolation program in C++ that can accept an enormous amount of data (~40k samples per camera), and interpolate smooth internal contours, or 'waves' between them. Exposure compensation conversions were made with the same interpolation engine (transforms replicating sensor color response with variant exposure).

Another significant element of the project was to recreate Arri's Rec709 to maintain the entirety of recorded LogC gamut, in a film-derived envelope (for the display variations). This was particularly difficult, as the correct RGB primary behavior needed to be exactly replicated within contiguous 709, but smoothly diverge to HDR-like handling of far gamut (where Arri's Rec709 ends). This new envelope (EC Gen.4) is particularly impressive, and I may release it for the Arri, as it is significantly preferable to normal Arri Rec709.
P4Ka PDF
Emotive Color

For thoroughly tested LongGOP that maintains complete functionality with pristine imaging, I would highly recommend LPowell's FlowMotion v2. He really did top notch work there.

For thoroughly tested LongGOP that maintains complete functionality with pristine imaging, I would highly recommend LPowell's FlowMotion v2. He really did top notch work there.

For thoroughly tested LongGOP that maintains complete functionality with pristine imaging, I would highly recommend LPowell's FlowMotion v2. He really did top notch work there.

Absolute legend,  this man!