Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 05/02/2024 in Posts

  1. My rule of thumb is that if I use an item on 5 or more shoots, buying (and reselling at the end) is cheaper than renting. That's probably fairly conservative too: I usually buy used, so when I sell I get 60-80% of the cost back. I've even sold cameras at a profit after 1-2 years.
    3 points
  2. @John Matthews While I'm sure you could just put a bit of gaff tape over the contacts and manually program in the focal length you want for IBIS have the camera treat it like a manual lens and get the high stabilization mode, it probably wouldn't be ideal because then you'd also lose aperture control, AF, and most likely the ability to even focus, as I'm assuming it's an electronic/focus-by-wire lens and would need the contacts active to be able to function.
    2 points
  3. Absolutely. Another consideration for some is availability. When I was hanging around reduser.com it became pretty apparent that a common thing was to own a RED (obviously!) and also a set of vintage primes, but to rent modern lenses. The rationale was that often these cinematographers were doing personal projects and having the vintage primes made it so that they had a set on hand for whenever the personal project was able to be scheduled. Quite a few were filming one (or more!) documentaries too, and are essentially on-call so that if something suddenly happens they can grab the camera and go. It was common for these guys to store the camera in a go-bag, often rigged up and sitting next to the front door. Good luck shooting that if you got the call and then had to rent equipment in the middle of the night!! Film-making varies much more person-to-person than most people expect, and logistical factors or aesthetic preferences can easily flip a decision between two different people and their circumstances.
    1 point
  4. I used the new high e-stab on my s5iix on a shoot last week to test it out, pretty dang smooth! Although the crop is quite significant, I was running around getting very gimbal-like footage on the venerable sigma 18-35, but at 18mm, plus the crop in 60p, still quite tight, so I may use this more with the Sigma 14-24. Great new tool in the toolbox of this already amazing camera though.
    1 point
  5. Sorry. UK idiom. 'Old' in that context doesn't mean old. My bad.
    1 point
  6. I personally think that these are hard to beat. I own four of them. I came from running two 575w HMIs but these are brighter, quieter, and more affordable. There's no ballast or extra cabling, which for me is a plus. They also have a dedicated remote control available so you don't have to rely on an app. The only "drawback" is that they can't be powered by v-mounts, but I have other lights that can be. I'm very intrigued by the design of the new Molus G300 because I think I could fit two or maybe even three into a single case. But there are several ways in which the Nanlites still beat them.
    1 point
  7. Sorry to take the thread off-topic, by the way.
    1 point
  8. kye

    Best bang for buck lighting

    If you're fighting the sun then yeah, serious horsepower definitely comes into the equation!
    1 point
  9. There's a lot more to the question than just which lights to use. If you're indoors and feel like you're fighting the sun and if the windows will be mostly out of focus in the background, you can just put ND gel over them - it's fairly cheap and fast. If they'll be in focus, IMO ND gels look a little bit like shit so that might not be your best option. If you're outdoors and fighting the sun, especially for close-ups, a collapsible reflector or two (or three if you have one which can give some negative fill) is often a lot better than trying to compete with the sun with your light. You can get a pretty big reflector for about $30 from almost any photo store in the world. Otherwise, short of going with really big lights, if you're trying to blast a light through a window and have it compete with the sun, it's going to have to be a pretty big light. In those cases, I'd probably try to find a way to shoot the scene differently. 😄 These days my main kit consists of 1xAputure 600X, 1xAputure P300C, 1xAmaran 300C, 2xAmaran 150C - as well as the B7C lunchbox, MC4 mini-lunchbox, and a few scattered MX's. It's more than enough for almost anything that I shoot. I'll probably continue adding some stuff here and there when Aputure have huge sales (their Black Friday sale is legit - I got a huge discount on the 600X plus a couple of bonus things). If I need to go bigger than that, I'm more likely to rent it or to just hire a gaffer to roll up with a box truck full of stuff. For shooting on the go, I just also put together a kit with 3xStellaPro's with their Bowen mount - they're tiny and run off of USB-C so I can plug 'em into a V mount plate or even a battery bank. Only disadvantage? Above 30% or so, the fan runs constantly. I'm excited to actually do a shoot with 'em. I also picked up a Molus X100 for the cases where I want somebody to hand hold a light. It's alright, but the reflector in the Bowens mount seems to do some funky things with my softboxes.
    1 point
  10. Well kinda disagree on this one. For me its about the look I can create with the lights, and during daytime I am allways fighting the sun. And 300w led lights for example dont allow much creative looks. Were playing with iso's you are just lowering or increasing exposure as is and not affecting the look in a dramatic way. Like popping the subject from the background. Not sure if you ever do flash photography, but I absolutely love the fact I can completely change the look of an image in bright sun with an flash. But yeah I dont like to deal with huge ass lights either an an one man band.
    1 point
  11. The 300w leds are great to have, of which I've used only the Aperture fixtures though. The 600D has a big footprint. Rather use a 2.5K HMI instead. But of course the Aperture is much lighter to rig and much less power draw and easily powered by regular circuits. Anyhow, 300w spot leds would be it on the top spots of the list. I also like the 100w amarans. Lightmats and tubes are super neat and easy to use. The amarans come in stronger versions now too. Havent tested them but seem to be great bang for the buck regarding light quality and usuability.
    1 point
  12. My big light is the Smallrig 450D. I love it. It's well-built and super bright when I need it. That said, most of the time the brightest lights I need are 300w.
    1 point
  13. With reflectors on it's definitely around 2-3 stops brighter than my Godox SL200.
    1 point
  14. Take a look at Amaran and Smallrig
    1 point
×
×
  • Create New...