Jump to content

Atomos Ninja V SSD Question


chadandreo
 Share

Recommended Posts

6 hours ago, IronFilm said:

 

 

10 hours ago, androidlad said:

https://www.atomos.com/drives

You don't have to use the Angelbird mini SSD, full size drives work too but they will protrude to the left side a bit.

Thank you for the video and the link. Ive been to that link, but The Atomos site isn’t very clear about what SSDs are compatible with the Ninja V. It only mentions the minis. They also do not have the a section for the Ninja V under supported devices. 

Link to comment
Share on other sites

  • 10 months later...
On 9/27/2018 at 2:15 AM, chadandreo said:

Does anyone know if the Ninja V will work with non SSDmini SSD's?

If not, what SSD would you recommend for the X-T3 and other cameras with similar specs?

I believe I’m using WD Blue in my Ninja V and haven’t had any issues yet with X-T3, EOS R, Z6, and A7 III  

Also have some off brand OCZ that came with my Ninja from eBay. That has worked okay as well. 

Link to comment
Share on other sites

23 hours ago, hijodeibn said:

Samsung 850 and 860 Pro are the way to go, they work in all Atomos.

The 860 Evo still works fine. Just make sure you use the 1TB version or higher (sustained write speeds drop off in the smaller capacity drives relative to the pro versions, but are the same for 1TB and higher capacities).

https://ssd.userbenchmark.com/Compare/Samsung-860-Pro-1TB-vs-Samsung-860-Evo-1TB/m434505vsm423831

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...