androidlad

OMG you're the DIY perk guy!! I'm a huge fan! Every time I see LED lights I think of you ?

We are talking about sensor readout, not shutter speed.

fps means a lot. In order to get 60 frame per second (which is 1000 millisecond), the sensor readout/rolling shutter has to be minimum 16.7ms per frame (1000ms/60). X-T3 4K 60P rolling shutter is exactly 16ms to meet the bare minimum. For EOS R's 4K 30P cap, 33ms is the bare minimum.

Data-rate can be the same, on X-T3 you can choose 100Mb/s for 4K 24p to 60p.

Actually, 60P forces the camera's to have lower RS, because 1000ms/60=16.7ms

It was tested a while ago, 30.45ms rolling shutter in 4K.

So far it has been quite reliable for me and there's definitely a performance boost. 2019 updated the GPU acceleration engine, have you updated your GPU driver?

I got a response from Atomos saying they are going to get a loaner X-T3 to investigate. I'm kinda surprised they didn't test it with the actual camera before product launch...

Sony will announce something on the 16th, might not be A7SIII related though.

Adobe just released massive updates to the Creative Cloud apps. I'm thrilled to say that Premiere Pro performance with X-T3 H.265 HEVC files has been significantly improved!

Because Canon Log stays in BT.709 gamut while F-log uses BT.2020 gamut, without correct mapping the F-log shot would appear extremely dull. I believe EOS R can also output BT.2020 externally.

I'm thrilled to say that Metabones just confirmed in an email that they are working on EF-X Speedbooster and some other new products!

Around A7S III announcement, Sony may also announce their own set of "focal reducers" for pro video products, seems to be called "compressor", E to E mount for use on Super 35 E mount camcorders. If used on E-mount mirrorless such as A6500, PDAF points will be limited to 144.

Did you set the stabliser setting in the app to Panasonic? Did you connect the microUSB to the tilt motor? Did you power on the gimbal first before the camera?

Another example showing the discrepancy between internal log recording and Ninja V recording, pretty drastic!

Why not Z CAM E2? Same sensor as Pocket 4K and much more feature set. It's shipping now.

It was a slip of tongue. He meant auto iris was stepped. auto ISO on X-T3 is completely smooth (I have it and tested), X-H1 fixed it with a firmware update. There's no way for FUJI to take a step back on X-T3.

It is going to. With the add-on units.

What's BS about that? The add-on unit(s) allow A7S III to interface with AXS-R7. The previous post was a rundown of total cost for full blown RAW workflow. I wouldn't even call it rumour, as it's part of NDA lifts, we'll see more soon.

Insight from Thomas Smet over at Dvxuser:

I think people are comparing GH5S with X-T3, not GH5.

X-T3 120p has 1.28x crop. 1.5 x 1.28 = 1.92x relative to FF It's multiplication, not addition. Regarding HFR bitrate, it doesn't need to be very high because HFR footage have very small motion difference in between frames, which is highly efficient for interframe compression. X-T3 does 120P at 200Mbps Long GOP, and ALL-I is not available for HFR including 4K 60p, likely due to processing power constraints.

All of the E2 footage released so far have that home video look, with an off-the-shelf sensor IMX294 it's hard to tune in the right colour science.

4K 60P full readout, 4K 120P 1:1 crop.

Pretty impressive except for the harsh blownout highlights outside the car window, most camera will struggle with this so from a production standpoint, they could have put a sheet of ND gel over the window to bring the highlights down a bit.