Jump to content

thephoenix

Members
  • Posts

    1,015
  • Joined

  • Last visited

Posts posted by thephoenix

  1. On 12/29/2018 at 1:08 AM, Snowbro said:

    Random Thought: Reviewed more of my XT3 footage, I think the lens at f/2 was a tad soft (not cameras fault), but man.. that image is beautiful out of the camera. Especially when converted to the arri log from f log.

    Here is the Flog > LogC sup2 LUT I made and ill post the LogC> Official Arri 709 LUT that matches too. Enjoy!

     Flog-LogC_Sup2x.cube

    ARRI(Official)_LogC2Video_709_adobe3d.cube

    how do you install luts on the xt3 ?

    using them keeps the flog recording right ?

     

  2. so i've been shotting a few things lately while i am traveling.

    about the focus peaking i can say that the color you want to use is bright yellow. i barely could see the red, sometimes didn't see anything with the red selected, with yellow it is much much better.

     

  3. 5 hours ago, androidlad said:

    You can't put any LUT into the camera, but there's a feature called "Natural Liveview" that works as a view assist, it displays a BT.709 image on screen but records F-log.

    can we have the "eterna look" on the screen and record flog ?

     

  4. still learning to use my camera.

    one thing i find anoying is the fact that when using af if you touch the manual focus ring it goes to manual focus. don't know how to go back to af except turning off and on the camera again or switching the front focus selection button

     

  5. 1 minute ago, thebrothersthre3 said:

    I've never found peaking useful, but maybe the cameras I've used all had it poorly implemented. 

    very usefull when shooting handheld and you don't rely on the af. but compared to the 5d mkII with magic lantern the fuji peaking is useless :(

    at moments areas that are in focus aren't visible because the dots are far too small and fade into the material wtf

  6. 8 hours ago, frontfocus said:

    no waveforms on the camera. Focus peaking: set the camera to manual focus. In the video menu look for MF assist and set it to focus peak highlight. You can change the color and intensity 

    thanks i did selected peaking then. it is just that you don't see it. can't believe how bad it is. i miss my 5D mkII with magic lantern for focus peaking

    i hope they will implement a waveform in a future firmware

  7. On 12/17/2018 at 2:00 PM, chrisE said:

    Still waiting for my hardcore Aurora ND filter from Kickstarter. The 82mm model seems to be delayed.... :(

    i've been talking with jeff, the creator and owner of the comapny and yes they are delayed, they have 86 but not 82 that are still in china or on they way on the sea

  8. The firmware update Ver.2.00 from Ver.1.02 incorporates the following issues:

    * Regarding the new function "Recording over 4GB movie file as one file" which was planned to add to the firmware Ver.2.00, we will announce the schedule to release the firmware with the function in January 2019.

    Regarding the details of No.1,3 and 6 download the "X-T3 New Features Guide" from our website.

    -- Select a language --English (PDF: 308KB)Français (PDF: 312KB)Deutsch (PDF: 312KB)Español (PDF: 308KB)Italiano (PDF: 312KB)Nederland (PDF: 308KB)Polski (PDF: 312KB)Svenska (PDF: 308KB)Norsk (PDF: 316KB)Dansk (PDF: 312KB)Pусский (PDF: 312KB)Suomi (PDF: 308KB)中文简 (PDF: 452KB)中文繁體 (PDF: 432KB)한국어 (PDF: 352KB)ภาษาไทย (PDF: 348KB)Arabic (PDF: 304KB)

    OK

    1.4K HDR video recording in Hybrid Log Gamma (HLG) 
    Supports 4K HDR video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards (*1). It allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high color saturation. 
    *1:Only compatible with H.265(HEVC). Please enjoy with television or display compatible with HLG formats.

    2.Simultaneous output of Film Simulation and F-Log footage (*2)
    Supports simultaneous output of Film Simulation and F-Log footage. It allows you to record in F-Log while checking Film Simulation image on an external monitor.
    *2:Not compatible with 59.94P/50P, FHD high speed rec., 4K interframe NR, and HDMI output info display mode. Also, cannot choose different image size (4K/FHD) for HDMI output and internal SD card recording.

    3.Display color temperature (Kelvin) on EVF/LCD Color temperature (Kelvin) can be displayed on EVF/LCD.

    4.Supports slower shutter speeds with DCI4K/4K 29.97P/25P/24P/23.98P (*4) Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P. *4:Cannot select slower shutter speed than framerate with DCI/4K 59.94P/50P or DCI4K/4K/FHD Long GOP recording. For detail, refer to the Shutter Speed in the “Movie Recording Mode” list.

    Movie Recording Mode(PDF:8.00KB)

    5.Compatible with ALL-Intra and maximum bitrate 400Mbps with H.264
    Using H.264 compression, you will now to be able to select ALL-Intra at a maximum bitrate of 400Mbps.

    6.Display power supply icon
    Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD (*5) and Anker PowerCore Speed 20000 PD (*6).
    *5:Anker and PowerCore are trademark or registered trademark of Anker Innovations Limited or associated companies.
    *6:Product may not be available on your country.

    7.Fix of slight defects

  9. 1 hour ago, andrew_dotdot said:

    2.0 firmware is released. Anyone running it yet?

    Downloaded the 1.2 like 8 hours ago and v2.0 wasn't available ?

    On 12/16/2018 at 3:33 AM, thebrothersthre3 said:

     

    would be cool to see a quick video test 

    I'd like to but i am travelling for the next 3 weeks and my laptop  Is far too old to handle It. Will do when i come back home

  10. 1 hour ago, webrunner5 said:

    I would imagine there is a variation even in the good ones, who the hell they are LoL, that make it hard to get a good one or end up with a dud. But for the average stuff done on here I doubt it is too noticeable. I have had several variable ones and the cheapest one I have seems the best, go figure. I think unless you pay a 1000 bucks for one, no guarantee there either I bet, it is hit or miss.

    well 1000 bucks is a bit expensive but it is parts that are made to last and that you always use, they don't get much outdated with time like a camera.

    i have heliopan and it is quite good but i need a larger one and as i have to travel in the us starting tomorrow will have to buy it over there 'heliopan was out of stock here) and heliopan is not easy to find in the us and quite expensive.

    he is objective that is the question as they were sent to him by the company

     

     

  11. The slr doesn't seem to offer a range as wide as the others 

    That Is a problem with the new cameras and high native iso

    7 hours ago, Kisaha said:

    What about this one? https://breakthrough.photography/products/x4-neutral-density?variant=30850759633

    If it was available in Europe, I would defi itely buy it, now, there is a chance the custom fees to be as much as the filter.

    The new Benro is supposedly very good also.

    I'll buy it and if not happy with it i'll sell It to you when i come back ;)

×
×
  • Create New...