Drew Veeneman

The first video from this shoot is now live. Check it out for a point of reference.
Concealed Carry Belts: 
Please forgive some of the camera shake... I was testing out a dual camera rig. Although it got the job done, the rig needs improvement and... more importantly, I need more skill wielding it. Between the two cameras here I was able to cover most of my mistakes and got some interesting Dutch Angles. The NX1 was simply mounted to a magic arm off the rails.
The tighter shot was the BMCC 2.5K with the 50mm F/1.4 Super Takumar and a cheap speed booster. Stopped down to about F2. With the backlighting it was flare-tastic! ... I should have put on the matte-box, but we were in a hurry.
The wider shot was the NX1 with the MIR 37mm at somewhere around F4. Somehow, although Sang and Mickey where standing next to each other, I really only managed to get Sang on the left in focus. That's user error. I tried to cover the mistake up with Luma Sharpen in Resolve... good enough.
---
Alright, lets try picking up where I left off. Grading...
The Samsung cameras put out a solid image with plenty of detail as you would expect. I used Andrew Reid's Flat LUT on the front end in Resolve as I was setting levels. After that I dropped on Hook's Luma Sharpen... and then the Super Film Stock powergrade from Color Grading Central (oddly I don't see his Luster Grades pack for sale online anymore). I've been using that same powergrade since the beginning Carry Trainer videos. Lastly, from there I tweaked the base colors on the levels layer... nudging the reds and blues a little to my taste.
Coming out of Resolve, I rendered the video in uncompressed 10-bit 4k for finishing on Sony Vegas Pro and final output to YouTube. Vegas is much nicer for audio... and it's just what I'm use to. In case your curious, the opening was done with some simple shots feed into the Prolost Handcrank plug-in in After Effects.
It could just be the lenses, but I did like the image from the BMCC better even though it had less resolution 2.5k vs. 4k, but with 4:2:2 maybe that's debatable. 12-bit RAW still has it's advantages. They were both good, but the BMCC just looks richer with it's own kind of film grain. Once my NXL speed booster arrives, I'll try using the same 50mm Super Takumar 1.4 on both cameras. With the variation in sensor sizes, that should work-out perfectly and be a better grounds for comparison... As you can probably tell that's my favorite lens these days.
Meanwhile, with my amateur shoulder shooting I could definitely see jello issues with both sensors.
The thumbnail/cover image for the youtube video was a Macro shot with my my NX1 and the Canon FD 35-70 Macro zoom. I had the belts inside one of those light tents common for product photography.

Hey gang, over the last month I upgraded my camera gear to 4K with a used NX1 and NX500 (replacing my old trusty GH2 and a6000). Since I regularly make videos for the Carry Trainer YouTube channel, I thought I'd start a thread here to share my experiences with these two camera's.
First, I tried both versions of the Samsung firmware. The Kino-Seed hack worked on my NX500, but not my NX1. Anyway, I settled on Vasile's nx-on-wake mod... it is worth the little extra work to install.
For the picture profile settings, I am generally following the recommendations from Andrew Reid's guide. For the NX1: Gamma DR, .95 Green 0-255 Luminance Level. On the NX500 I don't see any video controls... the picture profile is set to standard. As Reid suggested, I set resolution to 3840x2160 with a 24p frame rate.
Getting started testing my gear, I found my Fotodiox adapter wasn't triggering the sensor on the Samsung camera mount. Since I only use vintage manual lenses, I decided to just super glue the mount sensor down and avoid any future hassle (see attached photo). The glossy spot with the glue on the bottom of the mount is covered by the adapter, in case you were wondering about my sloppy work.
I did my first shoot with these cameras last week, Dec. 19, 2016... filming a few new Carry Trainer episodes. I work as a one-man band on multi-camera shoots, usually running two or three cameras. The classic Blackmagic Cinema Camera 2.5K remains my A Camera. The NX1 is now my B Camera... and the NX500 is the C camera. Anyway, on set I quickly discovered my NX1 couldn't handle the 210 MB bit rate. I dialed the NX1 back to 180... then it worked flawlessly for two hours. Battery life was good. Surprisingly the NX1 was only down to 50% battery at the end with 100GB of 4K video on the SD card. Meanwhile, the 64GB SD card on my NX500 filled up really fast. I was only able to use that for about half of the filming session.
I'll wrap up this first post with my transcoding experience. I do my editing with the free version of DaVinci Resolve, so transcoding the H.265 is a must. I used After Effects to line-up all the clips and rendered them to HQ DNxHR (I use windows). 98 GB of video off my NX1 SD Card grew into 433 GB worth of DNxHR footage. As a point of comparison, I came away from that same filming session with 370 GB of RAW footage on my BMCC. So serious 4K video eats up a lot of hard-drive space.
In my next post I'll talk about how the NX1 footage looked in the grading process...

Hey gang, over the last month I upgraded my camera gear to 4K with a used NX1 and NX500 (replacing my old trusty GH2 and a6000). Since I regularly make videos for the Carry Trainer YouTube channel, I thought I'd start a thread here to share my experiences with these two camera's.
First, I tried both versions of the Samsung firmware. The Kino-Seed hack worked on my NX500, but not my NX1. Anyway, I settled on Vasile's nx-on-wake mod... it is worth the little extra work to install.
For the picture profile settings, I am generally following the recommendations from Andrew Reid's guide. For the NX1: Gamma DR, .95 Green 0-255 Luminance Level. On the NX500 I don't see any video controls... the picture profile is set to standard. As Reid suggested, I set resolution to 3840x2160 with a 24p frame rate.
Getting started testing my gear, I found my Fotodiox adapter wasn't triggering the sensor on the Samsung camera mount. Since I only use vintage manual lenses, I decided to just super glue the mount sensor down and avoid any future hassle (see attached photo). The glossy spot with the glue on the bottom of the mount is covered by the adapter, in case you were wondering about my sloppy work.
I did my first shoot with these cameras last week, Dec. 19, 2016... filming a few new Carry Trainer episodes. I work as a one-man band on multi-camera shoots, usually running two or three cameras. The classic Blackmagic Cinema Camera 2.5K remains my A Camera. The NX1 is now my B Camera... and the NX500 is the C camera. Anyway, on set I quickly discovered my NX1 couldn't handle the 210 MB bit rate. I dialed the NX1 back to 180... then it worked flawlessly for two hours. Battery life was good. Surprisingly the NX1 was only down to 50% battery at the end with 100GB of 4K video on the SD card. Meanwhile, the 64GB SD card on my NX500 filled up really fast. I was only able to use that for about half of the filming session.
I'll wrap up this first post with my transcoding experience. I do my editing with the free version of DaVinci Resolve, so transcoding the H.265 is a must. I used After Effects to line-up all the clips and rendered them to HQ DNxHR (I use windows). 98 GB of video off my NX1 SD Card grew into 433 GB worth of DNxHR footage. As a point of comparison, I came away from that same filming session with 370 GB of RAW footage on my BMCC. So serious 4K video eats up a lot of hard-drive space.
In my next post I'll talk about how the NX1 footage looked in the grading process...

Hey gang, over the last month I upgraded my camera gear to 4K with a used NX1 and NX500 (replacing my old trusty GH2 and a6000). Since I regularly make videos for the Carry Trainer YouTube channel, I thought I'd start a thread here to share my experiences with these two camera's.
First, I tried both versions of the Samsung firmware. The Kino-Seed hack worked on my NX500, but not my NX1. Anyway, I settled on Vasile's nx-on-wake mod... it is worth the little extra work to install.
For the picture profile settings, I am generally following the recommendations from Andrew Reid's guide. For the NX1: Gamma DR, .95 Green 0-255 Luminance Level. On the NX500 I don't see any video controls... the picture profile is set to standard. As Reid suggested, I set resolution to 3840x2160 with a 24p frame rate.
Getting started testing my gear, I found my Fotodiox adapter wasn't triggering the sensor on the Samsung camera mount. Since I only use vintage manual lenses, I decided to just super glue the mount sensor down and avoid any future hassle (see attached photo). The glossy spot with the glue on the bottom of the mount is covered by the adapter, in case you were wondering about my sloppy work.
I did my first shoot with these cameras last week, Dec. 19, 2016... filming a few new Carry Trainer episodes. I work as a one-man band on multi-camera shoots, usually running two or three cameras. The classic Blackmagic Cinema Camera 2.5K remains my A Camera. The NX1 is now my B Camera... and the NX500 is the C camera. Anyway, on set I quickly discovered my NX1 couldn't handle the 210 MB bit rate. I dialed the NX1 back to 180... then it worked flawlessly for two hours. Battery life was good. Surprisingly the NX1 was only down to 50% battery at the end with 100GB of 4K video on the SD card. Meanwhile, the 64GB SD card on my NX500 filled up really fast. I was only able to use that for about half of the filming session.
I'll wrap up this first post with my transcoding experience. I do my editing with the free version of DaVinci Resolve, so transcoding the H.265 is a must. I used After Effects to line-up all the clips and rendered them to HQ DNxHR (I use windows). 98 GB of video off my NX1 SD Card grew into 433 GB worth of DNxHR footage. As a point of comparison, I came away from that same filming session with 370 GB of RAW footage on my BMCC. So serious 4K video eats up a lot of hard-drive space.
In my next post I'll talk about how the NX1 footage looked in the grading process...

Hey gang, over the last month I upgraded my camera gear to 4K with a used NX1 and NX500 (replacing my old trusty GH2 and a6000). Since I regularly make videos for the Carry Trainer YouTube channel, I thought I'd start a thread here to share my experiences with these two camera's.
First, I tried both versions of the Samsung firmware. The Kino-Seed hack worked on my NX500, but not my NX1. Anyway, I settled on Vasile's nx-on-wake mod... it is worth the little extra work to install.
For the picture profile settings, I am generally following the recommendations from Andrew Reid's guide. For the NX1: Gamma DR, .95 Green 0-255 Luminance Level. On the NX500 I don't see any video controls... the picture profile is set to standard. As Reid suggested, I set resolution to 3840x2160 with a 24p frame rate.
Getting started testing my gear, I found my Fotodiox adapter wasn't triggering the sensor on the Samsung camera mount. Since I only use vintage manual lenses, I decided to just super glue the mount sensor down and avoid any future hassle (see attached photo). The glossy spot with the glue on the bottom of the mount is covered by the adapter, in case you were wondering about my sloppy work.
I did my first shoot with these cameras last week, Dec. 19, 2016... filming a few new Carry Trainer episodes. I work as a one-man band on multi-camera shoots, usually running two or three cameras. The classic Blackmagic Cinema Camera 2.5K remains my A Camera. The NX1 is now my B Camera... and the NX500 is the C camera. Anyway, on set I quickly discovered my NX1 couldn't handle the 210 MB bit rate. I dialed the NX1 back to 180... then it worked flawlessly for two hours. Battery life was good. Surprisingly the NX1 was only down to 50% battery at the end with 100GB of 4K video on the SD card. Meanwhile, the 64GB SD card on my NX500 filled up really fast. I was only able to use that for about half of the filming session.
I'll wrap up this first post with my transcoding experience. I do my editing with the free version of DaVinci Resolve, so transcoding the H.265 is a must. I used After Effects to line-up all the clips and rendered them to HQ DNxHR (I use windows). 98 GB of video off my NX1 SD Card grew into 433 GB worth of DNxHR footage. As a point of comparison, I came away from that same filming session with 370 GB of RAW footage on my BMCC. So serious 4K video eats up a lot of hard-drive space.
In my next post I'll talk about how the NX1 footage looked in the grading process...

Hey gang, over the last month I upgraded my camera gear to 4K with a used NX1 and NX500 (replacing my old trusty GH2 and a6000). Since I regularly make videos for the Carry Trainer YouTube channel, I thought I'd start a thread here to share my experiences with these two camera's.
First, I tried both versions of the Samsung firmware. The Kino-Seed hack worked on my NX500, but not my NX1. Anyway, I settled on Vasile's nx-on-wake mod... it is worth the little extra work to install.
For the picture profile settings, I am generally following the recommendations from Andrew Reid's guide. For the NX1: Gamma DR, .95 Green 0-255 Luminance Level. On the NX500 I don't see any video controls... the picture profile is set to standard. As Reid suggested, I set resolution to 3840x2160 with a 24p frame rate.
Getting started testing my gear, I found my Fotodiox adapter wasn't triggering the sensor on the Samsung camera mount. Since I only use vintage manual lenses, I decided to just super glue the mount sensor down and avoid any future hassle (see attached photo). The glossy spot with the glue on the bottom of the mount is covered by the adapter, in case you were wondering about my sloppy work.
I did my first shoot with these cameras last week, Dec. 19, 2016... filming a few new Carry Trainer episodes. I work as a one-man band on multi-camera shoots, usually running two or three cameras. The classic Blackmagic Cinema Camera 2.5K remains my A Camera. The NX1 is now my B Camera... and the NX500 is the C camera. Anyway, on set I quickly discovered my NX1 couldn't handle the 210 MB bit rate. I dialed the NX1 back to 180... then it worked flawlessly for two hours. Battery life was good. Surprisingly the NX1 was only down to 50% battery at the end with 100GB of 4K video on the SD card. Meanwhile, the 64GB SD card on my NX500 filled up really fast. I was only able to use that for about half of the filming session.
I'll wrap up this first post with my transcoding experience. I do my editing with the free version of DaVinci Resolve, so transcoding the H.265 is a must. I used After Effects to line-up all the clips and rendered them to HQ DNxHR (I use windows). 98 GB of video off my NX1 SD Card grew into 433 GB worth of DNxHR footage. As a point of comparison, I came away from that same filming session with 370 GB of RAW footage on my BMCC. So serious 4K video eats up a lot of hard-drive space.
In my next post I'll talk about how the NX1 footage looked in the grading process...

Since I'm waiting for Nikon V1 to get exchanged(see previous post), I decided to give Zach Daniels raw stills a try.
https://vimeo.com/61939526
This is the same footage from Zach's original video:
https://vimeo.com/61863569
 
I edited the raw files directly in Sony Vegas Pro. Twixtor worked as you would expect, stretching the clips... I also did some motion cropping, which worked nice. With that much resolution you can make some big moves. The second clip feels somewhat like a crane shot. Lastly, I did some aggressive color grading to see what the raw can do. Needless to say, the raw photos grade beautifully... I was able to pull out plenty of detail.