snaps042 Posted February 28, 2020 Share Posted February 28, 2020 Hi all, Kinda stuck here. My trusty C100 will no longer connect to my Ninja 2. SoI tried with a mate’s C100 with the same result. I changed the HDMI cables 3 times. Same result. The Ninja 2 claimed there was ‘No Signal’. Strange as it was working last week and no menu changes have been made. I plugged the C100 into an external monitor and then a smart TV - all was well. A good, clean picture, the HDMI connections were all snug and jiggling them did not reveal any loose connections or result in any picture breakup. I then plugged my 5DMK4 into the Ninja 2 and the video image appeared immediately. Again, a good, clear picture and no issues when the HDMI connectors were jiggled about. We tried a second DSLR and that worked well too. So, the Ninja 2 has refused to work with 2 different C100 cameras but works quite happily with a Canon 5DMK4. Any ideas would be very welcome. Thanks! snaps ___________ C100 menu settings: OTHER FUNCTIONS > HDMI – TIME CODE > ON REC COMMAND > ON VIDEO SETUP > CHARACTER DISPLAY > EXT OUT HD ONSCREEN DISPLAY > ON Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.