Shane

Yes. The NTSC versions worked. THANKS. I'm still tinkering with the LX1002. Still trying to figure out if I'm getting real HLG. From what I've seen on the internet I should be able to pull back some highlight info with HLG, but the files that I get the highlights seem to be gone. Lots of saturation and lots of shadow information. Also, I hit one video mode that seemed to work but the saved file was mush. I've been flipping through so many variations that I don't remember which one it was.

I can confirm that it does not erase Cine D after update. I can also confirm that the camera can still load Cine D, Cine V and .MOV commands from @BTM_Pix's html file. Though the GX85 firmware update seems really minor. The other cameras got better updates.

I'm still playing around with what I can activate on the LX1002, but I'm stuck on getting the regular video modes back. Restore works to reset picture profiles but the camera video mode will stick in MOV or 100mbit shooting mode with no way to alter those in camera or from the HTML file. Is there way to restore the video shooting modes? I have filled up my C1-3 with HLG HD, HLG 24k and 100mps60p so I can't use those modes to "reset" the camera.

So it's definitely doing something on the Panasonic lx100ii. Hard to tell if it's doing what it's supposed to. Final Cut Pro X reads the footage as HLG 2020. It seems like the saturation is cranked up to 11. I did this side by side test with standard mode. There is a lot more dynamic range in the shadows. I pulled the mid tones up beyond the sliders after using the HDR tools to remap the colorspace to standard. Also, I had to save HLG as a custom C2 because it locks the shutter speed to 1/100 or less and no other Photo Styles are selectable. So I'm not sure how useable this mode is. But, there's definitely something interesting going on.

Cine D and V show as blank. There's a definite change in the style (though it seems contrasty and dark compared to how Cine D looked on the GX85, so working as in it changed, but possibly not to Cine D/V). 709Like puts the camera in standard. Update: I went back and tried some older versions of the html files and the MOV version. I was able to turn on HLG on the LX1002. I can't tell if it's actuall HLG because I've never worked in that mode before. It switched the minimum ISO to 400 but the image seemed two or three stops darker than 709Like (I got that to work by using an older version of your HTML file). I was able to get .MOV record mode as well as 1920x1080 60p 100mbps LPCM LongGOP mode.

It seemed like I could load Cine D and Cine V from that HTML, as well as start and stop record, 709 like sent the camera to standard mode. The 50p 100mbt mode returned an error (though I'm set up for NTSC not Pal if that makes a difference). I didn't see any option on that html page for HLG profile. Am I missing something?

I have an LX100 ii but no android device, only iOS. I used the browser method a while back for Cine D on my GX85. Would that method still work with the LX100ii?