lucabutera

Mirrorless - sorry! :-)

Today I installed and tested the new NX-KS V2.48 Hack, in my NX1 camera. I shot in real 4k (4096x2160) 180mb/s - 25fps! No frame repeating. This is the only Dslr can shot real 4k in 24 and 25fps!!! TNX.

Hi Cisco, I work on the crowfounding page!

Nikon 50mm f1.4, aperture f.2, iso 100, shutter speed 50. Original files.

I'm sorry FD mount it's impossible without modify the lens. For use Fd lens with focal reducer NX-L you need to remove the rear metal leverage.

Yes, I use: Canon 50mm FD 1.2 L with normal nx/fd adapter and Nikon Nikkor 50mm 1.4 AF with NX-L Turbo Boost adapter. I shot in manual mode, Iris F.2, Speed Shutter 50.

I confirm. Crop factor it's x 1.1

This discussion is an example of how complicated a simple thing. The speed booster increases the amount of image that is acquired by the sensor, consequently the sensor receive more light, increasing the brightness of the image of about a stop. Everything else is relative to the type of camera you use, make a technical discourse is useless, for each shot you have to set the elements in order to get the best. A light increase is positive and always helps, rather a worsening of light is always negative. In practice, if with your samsung nx you use a lens that has a maximum f1.4 aperture, you can use it at f2.0, getting the same light you had without the speed booster, but with better picture quality (in addition to other known benefits). Please if you want to continue this debate (already thoroughly discussed in the Internet), open another topic, please.

NXL increase 1 stop.

Samyang announces a full frame 20mm 1.8. It with NXL it's a 24mm F1.4 WOW!!!!!! :-))))) http://briansmith.com/samyang-announces-full-frame-20mm-f1-8-lenses/

poor results like this... (shot with Canon 8-15mm L).

I use the old coke bottle....

Thanks Ikslim, you're right, in your experience, but technically the "SpeedBooster" is a focal reducer. I have always worked with full aperture lens, my tests are done all at f1.4 and maximum 2.8. it does not add distortion or loss of detail to the edges. (From f4 forward, any bottle bottom works!). I am a detail maniac and that's what the NX1 does best. I have no intention of filters or iris in the adapter NXL, this is a stupid thing to do, also no one has figured large working miracles with Canon EF mount. There is no space between the sensor and lenses, is all filled to the tenth of a millimeter from glasses! My hope is that this adapter, can turn on a headlamp on Samsung NX camera system and resume production, so if sales go well, I'll invest my time and my money to create a smart adapter NX / EF. Best

Agreed

Thanks everyone for support. I would like to clarify that I have not started working on NXL adapter to make money. I decided to invest my time and my money for the love of NX1 camera. I am a ex user of the Canon 5D mkII, 5D mkIII, Black Magic C 4K, Sony a7s (waste camera, always crash with metabones smart adapter). The only thing I missed in this camera was the FF look that could not give me the aps-c sensor. I recommend this adapter videomakers, photographers who like to shoot in manual control, and have a large park full frame lenses and photographers who use the camera for artistic photos of portraits or landscapes. Responding to Pavel, the camera with NXL adapter, shoots at ISO 800 as ISO 1600 without NXL adapter, so even for the night is very indicated. Do not recommend to buy this adapter to those sports photographer because she would not have any benefit. Surely you will be better than me to find strengths and weaknesses of this adapter, and only you will know to use it according to your needs. It certainly is not perfect and certainly in the future, with your suggestions, I can improve it. Now I'm ready, I'm happy to announce that, I am preparing the website for a Kickstarter, where you can order the NXL adapter. P.S. Meanwhile I enjoy the Olympics on TV tonight!

3d printing professional is the only way for rapid prototyping. I changed at least 10 different forms. I worked on hundredths of a millimeter before finding the correct position. it is thanks to the press 3d if I could achieve a speed booster adapter for samsung nx, inside there is no space for screws or locking flanges, the support of the lenses is a unique piece interlocking. build it and was a puzzle. You do not know the 3D printer produces turbines for aviation turboprops. you do not even know what you're talking. follow this link: http://www.selltek.it/stampanti-3d/professionali/pro-x-300/

Today I go in a shopping centre to try others Canon lenses. This is the short video. Today I stop the prototype and I star to build a pre-series NXL adapter.

I do not agree! Metabones Nikon G adapters are priced at $ 479, they offer a focal reduction of 71X and can only be used with Nikon lenses. My adapter is the only existing for Samsung NX, provides a superior reduction and can be fitted with a Canon EF mount, Nikon F / G, M39, M42, Exakta, Pentax K, C / Y, Olympus OM, Leica R , Arri PL-STD-B, T -T2 mount- Novoflex A mount. It is built in Italy with quality materials and 3D printing technologies. Do you still think that it is expensive?

what is not variable?

Why complicate your life? If you want a nd filter, just add it to the front lens.

You can use it by simply mounting adapters Canon EF / to other brands. It will work perfectly because the adapter ring will adjust the distance of the flanges. From Canon to Nikon and others it is possible, but not vice versa.

Hi Carlic, thanks for your support. The production costs are not to CNC milling cutter, but what affects, is the cost of the glass, the glass cutting and the production of printing 3d parts impossible to realize also with 5-axis milling machine.