GeorgeM
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Posts posted by GeorgeM
-
-
Ok So I Installed the Hack and it seems to be working although I frequently get an error message that the SD card cannot support eh bitrate I am using. I will buy a faster card an d see but my big problem is that the 1.4.1 camera firmware has a nasty problem of causing the image to flicker from bright to dark in manual mode for no valid reason. I thought this was a setting problem but after trying everything I found another thread that blames this on the 1.4.1 firmware and said that the 1.4.0 firmware doesn't have this problem. So I downloaded it to see. However I launcher does not show a camera connected to the computer when I plug it in to downgrade the firmware. Is this caused by the hack? Secondly I don't know if downgrading the firmware is even possible with the bitrate hack installed. Has anyone tried this or have any suggestions as to whether this is even possible?
Exposure drifting in manual NX1
In: Cameras
Posted
I have been having this same problem on my two cameras so I downgraded to 1.4.0 on both and still have the same problem. The picture flickers bright and dark while on a static subject on a static tripod. I am about at the point to give up on the camera system it is just too unreliable. It almost cost me a major client this week. Also when in video preview mode I frequently , but not always, lose the ability to preview my exposure settings while in Manual mode. I can open and close the iris and change the shutter speed with no change in the led screen brightness. Then when I switch back to still mode the exposure adjustments I have made immediately take effect. I heard that this might be a result of using "Framing Mode" but this was turned off. Here is a link to the flickering footage. https://drive.google.com/open?id=1ko9s7iaV9gMz0oc3gF3RaiNpZk_sY9Yi
any help would be greatly appreciated.