Jump to content

Samsung NX500?


jagnje
 Share

Recommended Posts

EOSHD Pro Color 5 for Sony cameras EOSHD Z LOG for Nikon CamerasEOSHD C-LOG and Film Profiles for All Canon DSLRs

yes nx1 is much better in low light than the lx100, even though they have same photosite area (better bsi technology and noise is reduced by scaling down the croped 23,6Mpix down to 8,8mpix, the lx100 is just a 8,8mpix crop)  : same night scene iso 800 (already too much noise for the lx100)

lx100 : https://www.youtube.com/watch?v=WVaA0840d3M

nx1 (+samyang 24mm f1.5) :  https://www.youtube.com/watch?v=4gdrFX2oFDw 

guess who wins :)

i am in also to buy nx500 but i'll wait to see samples first because samsung should in all logic limit video quality on purpose to avoid stepping on the toes of the nx1

warning: 800 is the sweet spot for nx1 above that it falls appart and 3200 is terribly bad for a unknown reason 

 

 

​Thanks, that was exactly the kind of footage that I was looking for. :)

Link to comment
Share on other sites

  • 3 weeks later...

is somebody knowing the allocation of the six contacts
around the flash triggering one in the hot shoe of the nx500 ?  (see pict)

Since there is no 3.5mm jack audio input nor headphone output on this camera,
am I wrong thinking there is a chance analog audio signals can be transmitted
through these contacts?

samsung-nx500.JPG

Link to comment
Share on other sites

I cannot confirm it works with nx1/nx500, but I would guess so.

 

I remembered this mic from the "age" of older nx models. I've been a nx user since 2011 so I guess I know "almost" everything about this system :-) 

 

But to be sure that this mic works with the latest models, one should get it and test.

Link to comment
Share on other sites

I remembered this mic from the "age" of older nx models. I've been a nx user since 2011 so I guess I know "almost" everything about this system :-) 

​The ED-EM10 being no longer available, I am now considering to make of a small printed circuit
to enter my HiQ external audio signals.

Do you have the pin allocation, and ideally the electronic schematics of the hot shoe
interface of the NX series?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • EOSHD Pro Color 5 for All Sony cameras
    EOSHD C-LOG and Film Profiles for All Canon DSLRs
    EOSHD Dynamic Range Enhancer for H.264/H.265
×
×
  • Create New...