I WILL be getting a Fuji X-T3!

[John Roque 7]

I don't know if this has been addressed here but I'm finding some issues with flog with the xt3. Has anyone experienced these "pink splotches" before? These were shot in 10bit H.265. I'm finding that the HLG doesn't suffer from this issue. I placed a lut to emphasize the issue. Any help would be appreciated!

 

[androidlad 426]

11 minutes ago, John Roque said:

I don't know if this has been addressed here but I'm finding some issues with flog with the xt3. Has anyone experienced these "pink splotches" before? These were shot in 10bit H.265. I'm finding that the HLG doesn't suffer from this issue. I placed a lut to emphasize the issue. Any help would be appreciated!

Yes this issue was discussed extensively on this forum, see my post comparing F-log and HLG. There's something wrong with Fuji's F-log implementation, could be flaws in the encoding parameter. The solution is to shoot HLG instead, it's completely clean and in my opinion also offers better colourimetry than F-Gamut.

Please report this issue to Fujifilm by sending these photos along with a description http://www.fujifilm.com/contact/

We have to get Fujifilm's attention for a possible fix.

[John Roque 7]

22 minutes ago, androidlad said:

Yes this issue was discussed extensively on this forum, see my post comparing F-log and HLG. There's something wrong with Fuji's F-log implementation, could be flaws in the encoding parameter. The solution is to shoot HLG instead, it's completely clean and in my opinion also offers better colourimetry than F-Gamut.

Please report this issue to Fujifilm by sending these photos along with a description http://www.fujifilm.com/contact/

We have to get Fujifilm's attention for a possible fix.

Thank you!!!

[austinchimp 96]

One thing I've discovered - and this might help some people - is that the rendering settings in Premiere can create extreme banding and blotches in your h256 footage once you apply a lut.

I had terrible problems with this on my Mac, before I realised I'd accidentally created a sequence with the Metal hardware acceleration setting selected under Project settings. When I changed it to OpenCL, the banding went away completely.

Might be something worth playing with. I usually find Software rendering to be the most reliable for quality, albeit by far the slowest.

[Attila Bakos 173]

14 hours ago, John Roque said:

I don't know if this has been addressed here but I'm finding some issues with flog with the xt3. Has anyone experienced these "pink splotches" before? These were shot in 10bit H.265. I'm finding that the HLG doesn't suffer from this issue. I placed a lut to emphasize the issue. Any help would be appreciated!

 

Any chance you could share the original for this clip? Just the F-Log one.

[yiannakas 0]

I would like to buy a vfm field monitor (under 250$) from european amazon. Which one is capable of receiving 4k 60p signal?

thanks

[DanielVranic 43]

7 hours ago, austinchimp said:

One thing I've discovered - and this might help some people - is that the rendering settings in Premiere can create extreme banding and blotches in your h256 footage once you apply a lut.

I had terrible problems with this on my Mac, before I realised I'd accidentally created a sequence with the Metal hardware acceleration setting selected under Project settings. When I changed it to OpenCL, the banding went away completely.

Might be something worth playing with. I usually find Software rendering to be the most reliable for quality, albeit by far the slowest.

I personally use Davinci and I have never seen banding on my X-T3 footage. Not once.

[Attila Bakos 173]

Did some tests, inside and outside, couldn't replicate the issue. However I see that F-Log has a messier red channel, so if you're unlucky, you could absolutely run into situations where the difference is as pronounced as in John Roque's examples. If there's an issue here, it must be about compression. That being said I wouldn't recommend against F-Log just yet, I never had any problems so far.

It would be nice to see if an external recorder fixes the problem for those how are seeing it.

[androidlad 426]

Tilta is showing a cage designed for X-T3 (the one on the right).

 

[thephoenix 306]

told you

and more things to come for the xt3 from tilta

[webrunner5 2,457]

Hell we will all be dead by the time it ships so what is the big deal. 😬

[Desk 0]

Does anyone know if there's a gimbal which allows follow focus and zoom control support for the XT3?

Desk

[Kisaha 1,553]

It even says "Sharp 8K" there! 

The modular design is very interesting, if true.

[thephoenix 306]

1 hour ago, Desk said:

Does anyone know if there's a gimbal which allows follow focus and zoom control support for the XT3?

Desk

none that i am aware of.

support for fuji is pretty small on gimballs.

but i guess with the xt3 and 30 sucess it will change soon

[androidlad 426]

4 hours ago, Desk said:

Does anyone know if there's a gimbal which allows follow focus and zoom control support for the XT3?

Desk

Zhiyun Weebill Lab/Crane 3 Lab support it, by providing two motors for zoom and focus control.

[thephoenix 306]

i think he meant natively, if you add motorized follow focus then add the moza air 2

[thephoenix 306]

took the xt3 outside yesterday

 

[thebrothersthre3 717]

1 hour ago, thephoenix said:

took the xt3 outside yesterday

 

 

Nice, I was considering going the Vmount battery route, but I went with USB-C power as well. 

[Desk 0]

5 hours ago, androidlad said:

Zhiyun Weebill Lab/Crane 3 Lab support it, by providing two motors for zoom and focus control.

Hi,

Thanks for this. I'll take that support non-native, as an add-on, but is this only on the Lab?  The motors wouldn't work with the Crane 2?

Desk

[thephoenix 306]

2 minutes ago, thebrothersthre3 said:

Nice, I was considering going the Vmount battery route, but I went with USB-C power as well. 

power banks are enough for xt3 only. mine did last 5h and wasn't empty