Jump to content

Fuji X-T3 and X-T4 discussion


Andrew Reid
 Share

Recommended Posts

31 minutes ago, thephoenix said:

Which is why i added with adapters to 2.5  ; )

Same answer as to brunoch 

Should work with 3.5 to 2.5 adapters

Good luck !!!

I think a better solution would be to ask Fuji and Tilta what are connexions in their remote cable and to make a custom.

Link to comment
Share on other sites

EOSHD Pro Color 5 for Sony cameras EOSHD Z LOG for Nikon CamerasEOSHD C-LOG and Film Profiles for All Canon DSLRs
1 minute ago, BrunoCH said:

Good luck !!!

I think a better solution would be to ask Fuji and Tilta what are connexions in their remote cable and to make a custom.

By the time i will get answer i think i will have a new camera 

Weird i can only find 4 poles 3.5 to 2.5 adapters that are small. No 3 poles 

I could do one yes but i am afraid the welding will not last in time

Wiring i can find on the web

Link to comment
Share on other sites

  • Super Members
9 minutes ago, thephoenix said:

By the time i will get answer i think i will have a new camera 

Weird i can only find 4 poles 3.5 to 2.5 adapters that are small. No 3 poles 

I could do one yes but i am afraid the welding will not last in time

Wiring i can find on the web

If you have to do something custom and are concerned about doing the soldering (especially when trying to work out the connections) then these solderless terminal connectors are useful

61zxJmovHHL._SL1200_.thumb.jpg.a50c7558af4a4eb5eac3d9dbc759d387.jpg

You would then buy a 4 pole to 4 pole 2.5mm cable, cut the cable in half, strip the wires and put them into the terminals to make the connections.

https://www.amazon.co.uk/kwmobile-2-5mm-Balun-Converter-Adapter-Black/dp/B07NDGYSGB/ref=sr_1_3?ie=UTF8&qid=1550527647&sr=8-3&keywords=2.5mm+balun+converter

As you get two terminal adapters in the pack and you've cut your 4 pole cable in half you will then be able to make up 2 of the correct cables.

Once you've established what the connections are then you can have someone make up something more permanent.

Or just gaffa tape the hell out of the lashed up ones ;) 

Link to comment
Share on other sites

23 minutes ago, thephoenix said:

By the time i will get answer i think i will have a new camera 

Weird i can only find 4 poles 3.5 to 2.5 adapters that are small. No 3 poles 

I could do one yes but i am afraid the welding will not last in time

Wiring i can find on the web

The cable LANC1 on the tilta site should work (for sony FS5 and FS7)

https://tilta.com/shop/nucleus-nano-run-stop-cables/

See the screen capture on the documentation on FS7  3poles same as XT3

78C90398-1393-4382-B6C3-43C55D60BE72.jpeg

Link to comment
Share on other sites

17 minutes ago, MeanRevert said:

Hey guys, sorry if breaking up the flow of this thread but Just asking again.. 

Does the remote app allow touch focus? 

Also, if I were to record in flog, are there LUTs to convert to the fuji profiles like Eterna, Astia, Classic Chrome, etc.? 

Fuji has an official Eterna Lut, but none for the other color profiles unfortunately. They also have a Wide Dynamic range LUT. 

Link to comment
Share on other sites

20 minutes ago, MeanRevert said:

Hey guys, sorry if breaking up the flow of this thread but Just asking again.. 

Does the remote app allow touch focus? 

Also, if I were to record in flog, are there LUTs to convert to the fuji profiles like Eterna, Astia, Classic Chrome, etc.? 

The LUT's that Fuji provide are pretty bad fyi. Much much better off doing a Color Space Transform and manual curves.

Link to comment
Share on other sites

6 hours ago, BTM_Pix said:

Yes it does but be aware that when you are using app control of a Fuji camera then the camera itself is limited to only being able to record at 720p resolution.

WIth X-T3, the app records in 1080p.

And there's an upcoming update for the app, maybe things could change.

7 hours ago, MeanRevert said:

Hey guys, sorry if breaking up the flow of this thread but Just asking again.. 

Does the remote app allow touch focus? 

Also, if I were to record in flog, are there LUTs to convert to the fuji profiles like Eterna, Astia, Classic Chrome, etc.? 

Fuji only has Eterna LUT, BT.709 LUT and a pure gamut transform LUT. The rest of the film sims, you'll have to use non-official ones.

6 hours ago, DanielVranic said:

The LUT's that Fuji provide are pretty bad fyi. Much much better off doing a Color Space Transform and manual curves.

They aren't bad, they are standard transforms. The BT.709 WDR one is useful when a neutral image is required. Resolve's CST does not offer any roll-off so sometimes it may look harsh.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • EOSHD Pro Color 5 for All Sony cameras
    EOSHD C-LOG and Film Profiles for All Canon DSLRs
    EOSHD Dynamic Range Enhancer for H.264/H.265
×
×
  • Create New...