I'm working on a new project. It's for an organization who uses internet platforms for interaction around their product. So my promotional film for them will include some of this interaction on screen.
- What is the best way to do it?
- Using a Screen Recorder? If so which one is good on a Mac and using with MOV footage?
- Anny useful tips around these kind of shots?
Thank you so much!
By Matthew Marshall
Ive been looking for a particular piece to customize my rig. I dont know if it exists so I figured i'd post here in case anyone has run across it.
Basically it connects 2 15mm rods in parallel on the top and bottom. Except the second set of 15mm rods I need it to swivel. So probably two 15mm rod pieces with swivel action so it can be placed at different degrees of angle.
Basically like this item.
Except with the right ring parallel to the left and able to rotate to a 45 degree angle.
Im trying to mount my vmount battery plate at a 45 Degree angle from the back of the rig on 15mm rods.
Any help would be appreciated thanks!
Edit* found this as a better example.
Basically what this does but I already have the plate and I want an additional set of 15mm rods parallel to the plate itself.
As of tonight, the new iMacs are finally officially available for ordering from the Apple store. The maximum configuration looks something like this:
[*]3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
[*]32GB 1600MHz DDR3 SDRAM - 4X8GB
[*]768GB Flash Storage
[*]NVIDIA GeForce GTX 680MX 2GB GDDR5
[/list]All for about $4,500.
Opting for 8GB of RAM (to upgrade later) and a 3TB Fusion Drive instead bring the cost down to about $3000.
Also, the Cubix Xpander is an external peripheral that allows for the use of second GPU, and the 10GB/s Thunderbolt connection allows for additional drives to be hooked up externally -- including the 12TB Thunderbolt RAID.
This all sounds impressive, but how future-proof (i.e. ready for the next five years) is this setup? I suspect that it can handle 4K ProRes, but what about 4K RAW (and Davinci Resolve)?
I have also been communicating with a custom PC builder on eBay who is going to spec out a workstation specifically designed to work optimally with Adobe CS6 and Davinci Resolve 9. I'll post the results of that when I get them.