Search the Community
Showing results for tags 'taking lens'.
Found 4 results
I recently came upon a miracle item. Still boxed and packaged in original packaging and likely never opened up since it was purchased originally in late 60s or early 70s. This Iscorama cinegon (the original iscorama anamorphic) . The dk came with a Beaulieu taking lens which screws onto the rear element. Not sure what applications are possible but are likely. Here's the eBay listing http://www.ebay.com/itm/182422480036?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 I have many more auctions....for the next week or so I'll be selling all sorts of gear and accessories. jay
I made my first anamorphic purchase with a Kowa 16-H. I am waiting for Redstan adapters and I wanted to get some feedback on which taking lens would be ideal with my setup. I've heard that anything below 80mm will vignetter due to the Kowa's 2x and the mk III sensor size. For any mk ii / mk iii owners out there... what taking lenses are you using/recommend for your Kowa 2x?
I have been thinking about a rehousing project for a while now. What I want to do is rehouse the taking lens and the anamorphic adapter in one lens body. Originally I though about converting to a single focus system , calculating focus distances for each lens and adjusting the two helicals or grooves so that the Helios and the SUN would move together with the turn of a single focus ring. Now the calculation and the actual creation of at least one nonlinear helicoid would not be an easy task so for now I am designing a lens body for dual focus. There should be two lens groups that move separately: Front group is the front lens group from the SUN Back group is the back lens group from the SUN and both lens groups from the Helios This way when I turn the rear focus ring not only the taking lens focuses, but also the distance of the two SUN glass parts changes (the anamorphic part focuses in the right direction, but not exactly the right amount). The front focus ring would only need minor adjustment. Goals: Two lenses in one body Easier focusing Reversing the focus ring turn direction on the SUN glass part Reduced minimum focusing distance Tough, durable body (probably an inner shell from one piece of aluminium) Very small amount of parts (harder to machine so we'll see) No alignment issues Canon EF mount Built-in tripod mount (proper balance on a tripod) non-rotating 58mm filter thread (the current mod has a rotating thread) I will post some drawing to clarify what I wrote above.