hirsti

Here is a quick video showing the brilliant work Otto has been doing on the NX500 and NX1 using the SD Card hack.

All details can be found on https://github.com/ottokiksmaler/nx500

8 minutes ago, Pavel Mašek said:

I have downloaded sd.tar and follow instructions for customizing keys (https://github.com/ottokiksmaler/nx500/blob/master/Customizing%20keys.md) but it seems that NX1 do not want to load it. Boot takes same time and  I do not see any green dots and text "IP..." after pressing EV+MOBILE.

I couldn't get the NX1 to trigger anything with the EV+ button either.

you can change the contents of your nx_cs.adj file to say "shell script /mnt/mmc/scripts/EV_MOBILE.sh"

this will run the EV_Mobile.sh script at bootup, when you get the green dots go to settings and configure/connect to wifi or you will not get an ip address to connect to.

15 hours ago, Otto K said:

Well, for NX500 it seems CPU freq is from 100MHz to 800MHz:

[root@drime5 debug]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  
800000

[root@drime5 debug]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
100000

Someone with NX1 could see what's there.

The results are the same on the NX1