AaronL

wanted to bring out the warmth of the scene.

I for one beg to differ on the contrast settings, a simple low light test of identical scenes done it for me. I didnt use the hack or anzthing, but was definitelz able to pull more back .. I dont know why. master black is far more important, in low light the +10 or 15 is a world of difference!

16 hours ago, kidzrevil said:

I get best results when I add my own curve after I apply filmconvert

looks very nice, what is your verdict on it? ..imstill yet to see any footage on it by anybody.

I really want to see filmconvert get some professionally shot footage that really sells it, like they have done for other profiles.Im still on the fence for purchasing filmconvert, as money is tight at the moment. but my arm could be twisted

25 minutes ago, Marco Tecno said:

I have indeed green at 95, as per andrew's instructions.

wait,Im confused..does film convert reccommend to use andrews instructions? 

Are people just forgetting they have green at 95% or hasfilm convert just gone ott on the reds?

I would love to see some footage of the kit lens vs S lens. Im saving up for the S lens, but would love to see a side by side comparison.

build quality is also a major difference, nx1 is built like a tank.

also it is weather proof and has a built in flash.

nx1 also has different profiles suchas Gamma DR which nx500 doesnt have.

agreed DPStewart, for me personally, I dont care about any of the additions, bit rate is the only thing I care about so far as I have an NX1. I am still yet to try it, as my camera is currently travelling with my brother. but looking forward to giving it a go when I get it back! keep up the good work all involved,

..and I think most following the progress of the hack know where credit is due where the credit is due.

Im guessing the video clip was named twixtor, that is where the file name would be

28 minutes ago, sandro said:

How old are you then? :P

That's my son, he showed me this forum!, he will be 11 in july, ..My little Speilberg!

6 minutes ago, Turboguard said:

 

Oh shit, thanks guys! Is this new for 12.5 or have I just completely missed it in earlier versions too?

No idea, I only found out though this thread also!

13 hours ago, BenEricson said:

Is this included in the light version?

yes it is, just stretch your clip to whatever percentage you want as you normally would. then go to inspector > retime and scaling > retime process > opticalflow

you can get away with 25% speed with the right clips, maybe more

11 minutes ago, MountneerMan said:

Does the silent shutter work on the NX1 or still NX500 only?

Also something that I have been thinking about that is kinda related to the silent shutter is there has to be a continuous shooting speed for RAW images that will let the camera shoot continuously forever and wont buffer out? This would give us high-speed 6.5k RAW video. I dont know if it would be practical but I was just thinking that say if the NX1 can shoot 6fps continuously you would only need to speed it up 400% to get 24p. you could probably get away with 300%

It would definitely fill up your card fast lol but what do you guys think is this something worth looking into or would 6.5k RAW 4x speed video be useless?

4k Raw at 24fps would be amazing, if even for a few seconds.

edit:.. since the nx1 can shoot raw at 15fps burst mode, would it be possible to get 24fps out of it with silent shutter?

Anything other than -10 and you can notice haloing where there is sharp contrast of dark and light detail..

If you pay attention to circled area while the video plays you can see the effect it is having

4 hours ago, DBounce said:

Well for one thing, your video should be in-sync to the music. Most music video are shot with the music that is to be sync'd to playing while the talent acts out their role. This music is used strictly as a guide to aid syncing the footage in post. I'm sure all the pro in the forum know this. And I'm sure all the pros in the forum can clearly see you did not do this. If you had posted this footage and titled it as "some interesting clips of the woman I love"... Well, I would have said nothing. But you stated it was a music video... Which it is clearly not.

If you want me to teach you, I can, but I am not cheap! Best just goggle. There are several good tutorials about how to make music videos online. 

 

I bet you were that button smashing friend that always played as Eddie gordo in Tekken.

Also, nice work op, I enjoyed the music vid!

56 minutes ago, Antonis said:

 

Anybody noticed any rolling shutter issues on the BMMCC? Those first two shots of the bridge look like there is a lot of it when panning.

 

 

I see that also,...I thought the BMMCC was meant to have global shutter

1 hour ago, kidzrevil said:

Alot I suppose. I always got the most accurate color from them. Using other LUT's made it very difficult to get color that looked "natural" which sucked when shooting lookbooks and products. Filmconvert will be a great addition to the NX1 which already has some of the best color rendering

But is it still basically a form of LUT they are using, or is there some other processing happening? 

As somebody that doesnt have film convert, can somebody please explain how it works, (if they were to make an nx1 profile) if i purchase the software, will the nx1 profile come as standard?, or do i have to purchase the different profile for the differently cameras that I have.

Its just for people using bluetooth with androids marshmallow. If it doesn't relate to you, then best off not installing it.

ye ol code debugging curse..

quick question for nx500 users, how is the rolling shutter on 1440p? does it fall somewhere between 1080 and 4k or does it not co-relate

done and done! where did you come across the poll, I do not see it on their site or social media?

Do not currently have film convert, but I would invest if they do the NX-1. would be super handy

3 hours ago, Herb said:

kidzrevil,

Can you detail your settings in the latest video you uploaded?:

 

wow that looks amazing, also very interested in the settings. also what film grain did you use?

I only have the samsung kit lens which does not have a dedicated on off switch.

When shooting video there is no option to turn on or off OIS, only DIS. However there is the option in the photo menu. By turning on OIS in the photo menu, will this also stay on for video shooting? or is the camera only using DIS for video?

I would like to see the video without that annoying slow-mo effect. so needless.  other than that it looks nice!