Grimor

Hi all!
My G7 support next ISO:
<item id="menu_item_id_sensitivity_80" enable="yes"/>
<item id="menu_item_id_sensitivity_100" enable="no"/>
<item id="menu_item_id_sensitivity_125" enable="no"/>
<item id="menu_item_id_sensitivity_160" enable="no"/>
<item id="menu_item_id_sensitivity_200" enable="yes"/>
I setup ISO 80 and record video, next read exif and see this
ISO : 200  
......
......
Program ISO : 80
It is unclear what is really
___________________
Me interesting camera support "Master pedestal" someone tried to regulate it? :D 
___________________
I also wonder how the picture is transferred in real time from the camera to the application

------
FHD28m50p
mp4ed_25p_200mbps say ok! replace in settings to 4k24p 
mp4ed_50p_200mbps say ok! replace in settings to 4k24p 
mov_25p_200mbps say ok! not display quality 
------
FHD17m50i
mp4ed_25p_200mbps! replace in settings to 4k24p 
mp4ed_50p_200mbps! replace in settings to 4k24p 
mov_25p_200mbps say ok! not display quality 
------
FHD24m25p
mp4ed_25p_200mbps! replace in settings to 4k24p 
mp4ed_50p_200mbps! replace in settings to 4k24p 
mov_25p_200mbps say ok! not display quality 
------
FHD24m24p
mp4ed_25p_200mbps! replace in settings to 4k24p 
mp4ed_50p_200mbps! replace in settings to 4k24p 
mov_25p_200mbps say ok! not display quality 

4k24p
mp4ed_25p_200mbps say ok!  4k24p  Exiftools(mac): Avg Bitrate : 92.4 Mbps
mp4ed_50p_200mbps say ok!  4k24p  Exiftools(mac): showed Avg Bitrate : 92.8 Mbps
mov_25p_200mbps say ok! not display quality.  Exiftools(mac): (Image Size : 1920x1080, Megapixels : 2.1, Avg Bitrate - not show)
------
4k25p
mp4ed_25p_200mbps = ok! replace in settings to 4k24p = 94 Mbps
mp4ed_50p_200mbps = ok! replace in settings to 4k24p = 92.4 Mbps
mov_25p_200mbps = ok! not display quality Exiftools(mac): (Image Size : 1920x1080, Megapixels : 2.1, Avg Bitrate - not show)
------
Upload test files 4k25p, name file show quality.
mov_25p_200mbps.MOV
mp4ed_50p_200mbps.MP4

Yes those would be expected to fail at the moment.
There is some combination of video quality switch that puts the camera into an interesting runaway recording mode that could do with some structured testing if you have the inclination?
It basically needs testing in the following way
1) Put the camera into a 'legal' mode such as 4K25p
2) Use that html file to switch to the first mode in its list
3) Observe the return from the camera in the browser
4) If it says OK then press record on the camera and then stop again.
If you get a runaway recording that needs the battery pulling then repeat from the starting point which combination it was.
Unfortunately, to be comprehensive this test needs to be repeated for every single format in that html file.
And then ALL of that repeated with the starting point in step 1 being the next 'legal' format (ie 4K24p).
And then ALL of the ALL being repeated with it being in AVCHD mode and all its legal formats.
Because selecting a non-AVCHD format being sent to it causes it to change mode automatically, you still need to do all of the non-AVCHD modes and vice versa as it might well be this entire switching of mode that triggers something interesting.
That is a LOT of tests with not anywhere near approaching a guarantee of it working.
But its exactly this sort of structured matrix of tests that needs doing if everyone wants to chase this down. Stumbling upon it is fine - and shows that maybe there is something there - but it needs to be repeatable to move forward and also exhaustive in case there is a combination that takes this from 'interesting' to 'usable'.
Because of the extent of the testing needed, my advice would be to split it up amongst interested parties so someone takes the 4K25p starting point, someone else takes the 4K24p starting point etc
 
 

Thank you for this!!!
I believe I found a better workaround for using the C1,C2,C3 custom functions, where you can:
- Save the CineD for use as an actual profile and
- Switch to other profiles normally
I was able to save the CineD profile into the custom slot by clicking the Disp.Save button while in the profile change window. This saved the profile as Custom and allows me to switch profiles now, but at same time I can still go back to CineD by going to the slot where Custom used to be, it still appears as Blank with Custom misaligned to the very left top on the screen :D
See the pic  and check out the video I attached too.

20170607_033823_1.mp4

If you could find a GH4 that hasn't been upgraded then what I would be tempted to try is do the initial octopus boot up sequence and then go to the ROM backup menu that appears when you do this and do the backup to SD function.
Then get your updated GH4 and do the same and back its ROM up to SD.
These are plain text files though ideally you would open them both in a hex editor and do a compare between the old one and your upgraded one.
There might be a clue in there as to how you could do something that would allow the old firmware to be put on the GH4 with the newer one.....
Please note that I'm not in any way telling you to be brave and just go into the ROM backup menu and then load the file from the older version onto the GH4.
Its precisely the sort of reckless thing I would do of course

@Dan Wake @webrunner5 @jonpais This is the final edit:
Not sure i get the best, but however, thank you guys for your help.

I'll have a look to see if I have any cards with footage. I don't edit natively and transcode to ProRes for storage and edit. I then usually erase the card, but I may have one lying around. 

@Dan Wake @webrunner5 @jonpais This is the final edit:
Not sure i get the best, but however, thank you guys for your help.

@Dan Wake @webrunner5 @jonpais This is the final edit:
Not sure i get the best, but however, thank you guys for your help.

@Dan Wake @webrunner5 @jonpais This is the final edit:
Not sure i get the best, but however, thank you guys for your help.

@Dan Wake @webrunner5 @jonpais This is the final edit:
Not sure i get the best, but however, thank you guys for your help.

If you look at the corrupted files in VLC there is no codec information.
I've just taken an example HD file off the G7 and a corrupted 200mps one and compared them in a hex editor and copied the section that I suspect holds the codec identifiers into the corrupted file. 
This then displays the codec as expected when you open the corrupted file in VLC.
It still doesn't play any video but will open in QuickTime and play black for the correct length.
The file sizes it creates are relative to each other (i.e. a 10 second clip will be twice the size of a 5 second clip) but they're not the size you'd expect to see versus the 50mps 'real' files which should of course be much smaller but are actually only about 20% smaller.
So there is something there but it would take a lot more work to get to the bottom of it and then if it is related to the headers then it would also need a conversion app to correct before you could use the files and of course they would not be playable in camera. Thats a lot of ifs and a lot of graft. 

I meant the bitrates that are not the standard ones on your camera.  I'll have a play with the mov settings tomorrow, thanks

I made a similar combiantions page with higher bitrates, take a look:
 
DEPLOY VIDEO QUALITY.html

Where is the patio located?

Where is the patio located?

Great work @BTM_Pix
On the GH5, maybe we could unlock that 400Mbit 4K mode ahead of time 
CineLikeD on the GX80 is a great start.

I could be wrong but I tried changing setting in the camera for storing Custom settings, and I noticed that, maybe, Panasonic has changed something. Cause while the camera does engage CinelikeD, the message comes differently, I think, now.
Maybe it still happens, just that the handshake doesn't yield the same results (solely in terms of message on the browser). But everything does seem go happen. 

@Georgios said he will try to capture those packages

Youre a good man Georgios

Hope I won't loose my vlog-l,eh? :-)

Both imgapp & Gh4 were updated few days from glitch , and this door was closed forever.
But sniffing this days communication could be usefull today to guess the correct way to request this feature and try to get lucky

No way. Trying the request with the camera in AVCHD 1080 25p, change the mode to "misterious 200mbps" and the same corrupt file.
@anonim
https://drive.google.com/open?id=0B10Ows_xNNgHbUEwTk4tU0VWY0U You can download here.